what is the take out of 6 inches pipe of a socket weld 90 degree elbow
what is the take out of 6 inches pipe of a socket weld 90 degree elbow
2 inches
11 1/4
The take-off for a 30-degree elbow can be calculated using the formula: Take-off = Pipe Diameter × 0.577. For example, if the pipe diameter is 4 inches, the take-off would be 4 × 0.577 = 2.308 inches. This formula helps determine the horizontal run of the pipe after the elbow joint.
1-13/16"= The tangent of half the degree X the radius of the elbow.
39in.
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
7/8 of an inch
Measure to the center of the Ell and decuct for the threads ..
1/2 inch
4 1/2 inch
6 inch or 4 inch if it's a short radius