0
Add your answer:
Earn +20 pts
What is meant by the recycling of metals?
The recycling of metals is the melting down of scrap metal, and reusing the melted metal to make something new, for example, taking an old car chassis, melting it down, then using the metal to cast a new chassis.
What is the difference between scraping and scrapping?
Scraping means:"To remove (an outer layer, for example) from a surface by forceful strokes "Whereas scrapping means:1. Discard or remove from service (a retired, old, or inoperative vehicle, vessel, or machine), esp. so as to convert it to scrap metal.2. Abolish or cancel (something, esp. a plan, policy, or law) that is now regarded as unnecessary, unwanted, or unsuitable
What is difference between HMS 1 and 2 and Shredded Steel 211 scrap?
Shred 211 is from broken cars and tends to be under one foot pieces. HMS 1 &2 is Heavy Melting Steel that might be train wheels, plate, beams, rails, lager pieces from machinery etc
What does a circuit diagram for a scrap heap magnet looks like?
The cicuit at first is all conected when it is turned on then the person driving the machine will turn the engine off and the circuit will disconnect causeing the magnet not to keep hold of the metal.
Different between waste and spoilage and scrap?
Waste :-In the production process,waste of material does occur,such waste has no recoverable scheme,hence there is no chance of recovery from it. Scrap:- is the incidental material residue coming out of certain types of manufacturing processes,usually of small amount and low value,recoverable without further processing. Spoilage :- refers to goods damaged beyond rectification and which are to be sold suitably without further processing.
What is the difference between blanking and punching?
Blanking and punching are both shearing operation. The difference is only in the scrap. In blanking what you cut out is of interest.In punching what you cut from is of interest.For example: You cut a hole in a sheet metal. If you are interested in the disc that is cut out, then the process is called blanking. The sheet metal with a hole through it is the scrap. If you are interested in the sheet metal that now has a hole through it, then the process is called punching. The disc is the scrap.
How do you control spoilage rework and scrap?
what is difference between spoilage, rework and scrap
What is the difference between heavy scrap copper and light scrap copper?
Their weight
What are scrap metal selling for a pound?
There are many types of scrap metals. There are ferrous scrap metals and there are non ferrous scrap metals as well as precious metal scrap and exotic metal scrap. Each type of scrap metal sells for a different price per pound. Also depending on the grade of the scrap metal (prepared, unprepared, stripped, etc.) and your location in the world, the price of scrap metal will vary. Supply and demand also dictates the price of scrap.
What is the difference between a junk yard and a salvage yard?
The difference between a junkyard and a salvage yard is what they keep. A junkyard takes mostly car parts. A salvage yard takes all kinds of scrap metal like aluminum and copper.
When was Scrap Metal - band - created?
Scrap Metal - band - was created in 1983.
When did Scrap Metal - band - end?
Scrap Metal - band - ended in 1995.
What is the vaule of scrap metal on a ford SUV?
What is price of Ford Expedition as scrap metal
Is the catalytic converter on 1988 chev celebrity worth any money?
Yes, there is scrap metal value.Yes, there is scrap metal value.
Who mush do scrap steel cost per kg?
We want to sell scrap metal what is the cost for scrap metal per kg/
When was Epic Scrap Metal created?
Epic Scrap Metal was created on 2011-03-04.
What is---- PNS scrap metal?
Plate and Steel. A grade of scrap
