Pipette can hold a small amount of liquid but a graduate cylinder can hold more and its good for accuracy.
A pipette is more accurate. It can easily deliver one drop at a time.
The pipette, as it can be used to dispense microliters [liters * 10 to the power of -6] .
Graduated pipettes are not as accurate as volumetric pipettes, because each graduation line is not individually calibrated, and any imperfection in the internal diameter will have a greater effect on the volume delivered. In volumetric pipettes, the diameter of the pipette where the graduation mark is located is significantly smaller because the majority of its volume is located in the bulb.
A Volumetric Pipette is the most accurate and used for titration calculations, if you include that as a type of pipette then it is FAR more accurate than a graduated cylinder. A beaker is very inaccurate so don't even go there.
You can use a graduated cylinder or a pipette of 50 mL.
The glass with measurements that is attached to a pipette is called a graduated cylinder.
A pipette is more accurate. It can easily deliver one drop at a time.
A volume can be measured in laboratory with a graduated cylinder or a graduated pipette.
A graduated cylinder, a volumetric flask, a pipette, any graduated or calibrated container that will safely hold the fluid, a flow meter, a set of scales can also be used if the specific gravity of the fluid is known.
A pipette, Autopipette, burette, a graduated cylinder for more than 1ml. etc
It depends on the amount you want to take. If it is microlitres, you can use a micropipette, millilitres, a pipette (a burette would be more accurate), and if greater than that, it is best to use a large graduated cylinder. A graduated cylinder is more inaccurate than a pipette, but at volumes of 500ml for example, it is impractical to use a pipette.
27 mL of liquid can be measured with a graduated cylinder, a burette or a pipette.
A small graduated cylinder or beaker.graduated cylinderA measuring cylinder, a volumetric flask, a pipette, a burette. In the kitchen a measuring jug.The volume of a liquid can be measured by a graduated cylinder.To measure most liquids in mL you can use a graduated cylinder
Theoretically a graduated cylinder...but if the only graduate I've got holds five liters with graduations 100 ml apart and I'm trying to measure to the milliliter, the pipette would be more accurate.
The pipette, as it can be used to dispense microliters [liters * 10 to the power of -6] .
Graduated pipettes are not as accurate as volumetric pipettes, because each graduation line is not individually calibrated, and any imperfection in the internal diameter will have a greater effect on the volume delivered. In volumetric pipettes, the diameter of the pipette where the graduation mark is located is significantly smaller because the majority of its volume is located in the bulb.
To measure a volume of liquid, laboratory instruments known as glassware are used. The commonly used glassware are burettes, pipettes, volumetric flasks and graduated cylinders.