a helical spring has N turns of coil of diameter D, and a second spring made of same material and of same wire diameter has N/2 turns of coil of diameter 2D. if stiffness of first spring is k, then stiffness of second spring is
A strut is a combination of a shock absorber and a coil spring
An open coil spring has its coils not touching each other, leaving gaps between them. A closed coil spring has its coils tightly wound together without any gaps. Open coil springs tend to be less expensive, while closed coil springs offer more support and durability.
Other than the size, the number of coils, the spring rate and tension.....nothing.
A spring apparatus is often used to figure out the force constant of a spring. It has a ruler, spring (with a circular platform to add masses on) and a needle (place at 0 on the ruler). Because force and distance are directly proportional, as you add masses and see the distance on the ruler you can easily figure out the force constant with the equation Fe = kx , where Fe = FG = mg
They're usually sightly differently shaped to attach well to the strut and the chassis.
plane reflector
Closed coil helical springs are commonly used in various applications such as automotive suspension systems, industrial machinery, mattresses, and mechanical seals. They provide cushioning, shock absorption, and support in these systems due to their ability to store and release mechanical energy.
They are both coil springs, a lowering spring is shorter and usually has a thicker coil stock or more coils. Also with lowering spring you are set to one high as with coilover you can change your height whenever you want. also with lowering spring you have to buy new struts where the coilover usually come pre assembled with the struts.
What is the difference between the construction of a moving coil galvanometer and a ballistic galvanometer?
Coil refers to a continuous length of material wound in a spiral shape, like a spring. Strip is a flat and thin piece of material with a consistent width and thickness. Essentially, coil is a rolled or wound form of material, while strip is a flat sheet cut to a specific width.
a shunt coil needs external supply & tripping coil gets supply from itself.