0
CPM stands for Cost Per Mille, and it represents the cost per thousand impressions of an advertisement. RPM stands for Revenue Per Mille, and it represents the revenue generated per thousand impressions for publishers. CPM is a metric used by advertisers to determine cost, while RPM is used by publishers to measure revenue.
Add your answer:
Earn +20 pts
What is different between 15K RPM and 7.2KRPM?
The main difference between a 15K RPM (Revolutions Per Minute) and a 7.2K RPM drive is the speed at which the disk spins. A 15K RPM drive spins at a faster rate than a 7.2K RPM drive, resulting in quicker data access and transfer speeds. However, a 15K RPM drive may generate more noise and heat compared to a 7.2K RPM drive.
What calculated speed of a four-pole split-phase motor is 1800 RPM. However if you measure the shaft speed you will find it to be 1725 RPM. What causes this loss of rotational speed?
The loss of rotational speed is due to slip in the motor. Slip is a natural characteristic of induction motors and is necessary for torque production. The difference between the synchronous speed (1800 RPM) and actual shaft speed (1725 RPM) represents the slip in the motor.
What is the difference between centrifugation at RPM or g?
Centrifugation at RPM (Revolutions per minute) refers to the speed at which the centrifuge rotor rotates, while centrifugation at g (gravity force) refers to the force applied to the particles in the sample due to the centrifugal force. RPM can be easily converted to g force using a rotor's radius, and both factors influence the sedimentation rate and separation efficiency during centrifugation.
How cpm machine works?
A continuous passive motion (CPM) machine is a device used to move a joint without the patient having to exert any effort. The machine gradually bends and straightens the joint to improve circulation, reduce swelling, and prevent stiffness after surgery or injury. It helps in restoring the joint's range of motion and can be adjusted based on the patient's needs.
What is the relation between the path difference and phase difference?
The phase difference between two waves is directly proportional to the path difference between them. The phase difference is a measure of how much the wave has shifted along its oscillation cycle, while the path difference is a measure of the spatial separation between two points where the waves are evaluated.
Similarities between PERT and CPM?
Both are used for planning and scheduling. Steps to create both networks are similar
What is the difference between .RPM and .deb packages?
Check out the related links for information on the differences between .rpm and .deb packages.
Difference between gantt chart and CPM?
Gantt chart is a tool which is useful in scheduling the various activities of a project in the form of horizontal bar graph where as CPM provides a graphical view and network of events and activities in chronological manner.
What is the difference between 1500 and 3000 RPM?
RPM stands for Revolutions-Per-Minute, and is counted at the crankshaft. At 3000 RPM the engine is spinning twice as fast as at 1500 RPM.
What is difference between stall and rated RPM?
rated rpm is the maximum number of complete rotations that a rotor can rotate for every minute
What is the sound difference between 33.3 and 45 RPM records?
NONE AT ALL.
What is difference between torque at Nm equals 120 rpm equals 1800 and Nm equals 120 rpm equals 4000 give detail better as performance and load capacity in petrol engine?
Difference between Torque and load
Is there a big difference between 4200 rpm and 5400 rpm in computers Enough to notice in the performance of the computer?
Yes, you will see a difference in performance, read tests and write tests. As rule, 5400 rpm hard drives are faster and perform better.
Difference between 7200 rpm HD and 5400 rpm HD?
7,200 revolutions per minute compared to 5,400 revolutions per minute.
Explain the differences between CPM and Pert Techniques?
kamil_ka@list.ru
In trucking What is CPM How does CPM pay work and What details do I need to know about CPM?
Cents per mile
Is there a difference in sound quality between 7 and 12 inch vinyl singles?
Not if both are 33.3 rpm recordings. There is a big difference in capacity.
