0
Add your answer:
Earn +20 pts
What is the basic difference between ofdma and sc-fdma?
The basic difference between OFDMA and SC-FDMA is that, there there is an additional block of N point DFT before the sub-channel mapping in SC-FDMA. This will effectively reduce the PAPR, thus the power amplifier will have a lesser linear range in SC-FDMA when compared with OFDMA
What is the difference between ram and rom with basis of difference?
Ram reads and writes to memory; but upon interruption of power loses all data. ROM reads only memory, but is not dependent on power. Easy examples of RAM and ROM technology: RAM: RAM or memory of your computer, vram (graphics card ram) need power to be accessed (read or written to). ROM: CD-ROM, DVD-rom are mediums that require no power to be read from. However the disc does need a drive drive needing power to spin the disc and power for the laser to read the binary code. But the individual cells don't need power to keep the data. To some extend a harddrive, flash drive, ssd, BIOS chip, CD-DVD RW's are a mixture between both; can be recorded to, and don't need power to retain the data.
What pattern describes how the decimal point moves when you multiply a decimal by any power of ten?
It the power is d, where d is a signed integer, the decimal point moves d place to the right.
How do you use a pattern to find the product of a power of 10 and a decimal?
If the power of ten is k, where k is an integer thenif k < 0 then the decimal point moves k places to the left;if k = 0 then the decimal point does not move; andif k > 0 then the decimal point moves k places to the right.
What is the difference between base and exponent?
lol dont be silly. google it. jk um, base is like 2. exponent is like to what power you are multiplying the base. 2^3 is 2 times 2 times 2 which equals 8
What is a sag in power systems?
sag is the difference between the point of support to the lowest point of the conductor.
What is the difference between a power point and a white pointer shark?
dfs sd
What the difference between process piping and power piping?
What the difference between process piping and power piping?
What is the difference between publisher and power point?
Publisher is a program used to make printable documents such as, brochures, newsletters, flyers, and things of that nature. Power point, however, is designed to make slideshows (with special effects) that can be veiwed on the computer, but printed if necessary.
What is the difference between Microsoft Access and powerpoint?
PowerPoint is for creating presentations. Access is for managing databases, which is usually done by businesses.
What difference between RF power output watt and electrical power output watt?
The difference is in the output frequency.
What is the difference between Brake power and horse power?
Brake power is stopping power and horsepower is go power.
What is the difference between AT power connectors and Baby AT power connectors?
There are no differences between the power connector of an AT motherboard versus that of a BabyAT motherboard.
What is the Difference between power of attorney and registry?
love
What is the relationship between the firing delay angle and the input power factor?
The firing delay angle is the point in the AC cycle at which a thyristor starts conducting. By adjusting this angle, the power factor of the system can be controlled as it affects the balance between real power and reactive power. A smaller firing delay angle can improve the power factor by reducing the phase difference between voltage and current.
What has the author James Karney written?
James Karney has written: 'Power of-- CorelDRAW! 5 for Windows' -- subject(s): Computer graphics, CorelDRAW! 'The official photodex guide to ProShow 4' -- subject(s): Computer graphics 'Power of-- PowerPoint 4 for Windows' -- subject(s): Microsoft PowerPoint (Computer file), Presentation graphics software
What is the rule for converting from one metric unit to the other?
Determine the power of ten corresponding to each unit. If the new power of ten is higher, you move the decimal point to the left; if it is lower, you move the decimal point to the right. The difference between the powers of ten tells you how many places to move the decimal point.
