The kx bulb has an extra pair of wire contacts (4 instead of 2) per side. This decreases the amount of current each contact has to handle and decreases the amount of heat build up on the socket. The regular 3057 or 3057K bulb can be used, but it will probably burn out a bit faster and can damage the socket over time.
3057K - Design AMPS: 2.1, Rated Life: 2,000 4057K - Design AMPS:2.23, Rated Life: 4,000
Well. I work at NAPA and it called for a 3057kx which we naturally don't have in stock. But when the customer pulled the bulb out it was a 3157. which will fit in its place. It might be some sort of long life bulb. Just put a 3157 in there. that's what most brake lights are.
You can unscrew a light bulb.
it is difference between wet bulb temperature and dry bulb temperature.
The 100W light bulb is brighter than the 60W light bulb. The difference in brightness is 40 watts.
The difference between wet-bulb and dry-bulb temperature is called the Wet-Bulb Depression. It is a measure of air humidity, with a larger depression indicating higher humidity levels.
power difference
H1 bulbs have 2 spade connector and the H7 bulb has 1 spade connector
what is the difference between bulb angle and bulb flat used in ship building
a normal light bulb gives off more light
It is saturated.
No, the humidity is high when wet and dry bulb temps are far apart.