A pH meter is an ion selective electrode (H+), it gives pH to a far more accurate figure and leaves no room for interpretation (based on wetness of strip, colour may appear to show different pHs with univ. indicator
Indicators would work to determine the pH of colored substances. The color change may be difficult to read depending on the indicator used. Another alternative to adding a indicator to the substance would be to use a test strip.
I think you could be referring to a barometer, which measures atmospheric pressure and is an indicator of when it will rain or shine.
A Volt meter is used to measure potential difference (a.k.a. voltage). Potential difference is measured in units called: Volts (V).
1 Watt = 1 Joule / Second = 1 Newton-meter / Second.
1 yard = 0.914 meter 1 meter = 1.09 yards
A pH meter uses a probe and voltmeter to measure pH digitally. Universal indicator is a mix of indicators that change colour to indicate the pH of the solution. pH meters are accurate and will detect changes quickly, whereas universal indicator is slow to change colour to indicate pH change.
using an universal indicator, or you can use litmus paper or a pH meter.
None.
"in" and "out" are the direction of the pressure.
To determine the pH of a range of solutions, you can use a pH meter, or a universal indicator.
least sensitive- universal indicator sensitive- litmus papermost sensitive- pH meter
red cabbage is a good universal indicator you need a red cabbage hot water and a pestle and mortar put hot water into the mortar and crush the red cabbage leaves with the pestle the water should turn purple. your own universal indicator!
Hello
LCR meter is a device. And electrochemical impedance spectroscopy is a method. So the difference between them are like the difference between pen and writing.
1 meter = 1,000 millimeters 1 millimeter = 0.001 meter The difference between 1 millimeter and 1 meter is 999 millimeters. That's the same length as 0.999 meter.
9m2 3mx3m
0.75 metres or 75cm or 750mm