It is used in different lithographic equipment. Please see http://www.crystec.com/neulithe.htm
You need mask for complicated selections. If you have a bunch of objects in composition, you could use mask for faster and more productive work.
Not at all really just the picture where link is and the mask is different not the actually picture.
if im right, mamoru (tuxedo mask) is a college student. usagi is around 14 ( i dont know the exact age of tuxedo mask)
Reticles should be stored at the same temperature as the reticle stage in the stepper or scanner, otherwise overlay errors may occur due to dimensional changes after alignment. Some litho tools allow reticles to be stored inside them for some time before use to allow temperature stabilisation. Humidity levels should be moderate - typically 50% RH is fine. There should be NO static charge in a reticle storage environment. Ionizers are virtually compulsory. However, don't be tempted to GROUND the reticle itself as it will be more likely to be damaged if it is grounded. One cannot discharge a reticle safely by grounding it - and if there is a field around a grounded reticle the field will be focused onto the reticle - so the best solution is to keep the reticle away from ground and to keep it in an ionized atmosphere.
Classless protocols send a subnet mask with each route advertisement
All of the major scope in Black Ops 2 have their own Reticle Challenges. In order to change reticle colors, you'll need to finish all of the Reticle Challenges. You can access the Challenges in the Barracks menu.
Crosshair or reticle.
The Grill is slightly more expensive that the Profiler, and has a different look, better quality foam, and an overall better lens.
This is an opinion based question but may say that the Reflex sight is the best reticle on the game "Call of Duty : Black Ops"
With a holographic sight, the reticle is always on the spot on the target where the weapon is pointed. When a gun is moved left or right, the reticle moves as well, but is still on the point of aim.
Masks are used to clear the material of a semiconductor. It is done by exposing the silicon wafer to UV rays and then washing it in a solvent.A positive photo mask is used to remove the film wherever the mask is clearA negative photo mask is used to remove the opaqueA positive photo mask requires longer exposure than that of the negative
A red dot sight uses an LED light reflected onto a coated lens to create the aiming point, while a holographic sight uses a laser transmission hologram to create the reticle. Holographic sights tend to offer a more versatile reticle design and better accuracy, but they are generally bulkier and more expensive than red dot sights.