Grains refer to the bullets weight. A 40 grain bullet weighs four grains more than a 36 grain bullet. It's a little heavier, that's all.
5 F = -15 C 5 C = 41 F The difference is 20 C or 36 F.
welll...take a tape measure around your band, under your boobs, and get that size, let's say 36 cm for an example then measure the biggest part of your boobs where they are roundest lets say 38 cm subtract the second number from the first 38-36 = 2 cm this would make you a B cup if its a 1 cm difference its A cup, or for little girls, sometimes, AA 2 cm diff is B cup 3cm diff is C cup and so on...D, DD, so on and so on..... Hope i helped! = )
Since the bullet is fired straight upward, it will be decelerating due to gravity acting in the opposite direction of its initial velocity. Thus, at t = 3 seconds, the velocity will be less than 36ft per second but still positive (as it's moving upward). To calculate the exact velocity, you would need to use the kinematic equation for velocity in one dimension.
The electrical force between two charges is inversely proportional tothe square of the distance between them.If the distance increases by a factor of six, the new force compares tothe old force by a factor of1/(62) = 1/36 = 7.72% (rounded)
If the distance between the two masses is tripled, the gravitational force between them will decrease by a factor of 9 (1/3)^2. Therefore, the gravitational force will be 4 N.
The differences between the numerical values 52, 36, 50, and 34 are as follows: The difference between 52 and 36 is 16. The difference between 52 and 50 is 2. The difference between 52 and 34 is 18. The difference between 36 and 50 is 14. The difference between 36 and 34 is 2. The difference between 50 and 34 is 16.
The difference between 36 and 24 is 12.
36
54
The difference between 365 and 36 is 329. Add 70 is 399.
fifty-eight 36 + 58 = 94
36, as 325 - 289 = 36.
-16 - 20= -36
Well, darling, the difference between 36 and 24 is 12. So, a quarter of that would be 3. Simple math, honey, nothing to stress about.
25 degrees
The difference between 73 and 37 is calculated by subtracting 37 from 73. This gives us 36, meaning that 73 is 36 units greater than 37. In other words, 73 is the larger number, and the difference reflects the gap between these two values.
Call the numbers a & b, a being the larger. (a - b) x 100/a will give the difference as a percentage of a. EG: What is the percentage difference between 36 and 20? a = 36, b = 20; then (36 - 20) x 100/36 ie 1600/36 = 44.4recurring% To find the difference as a percentage of the lower number just swop a & b and ignore minuses. as above but a = 20 & b = 36: (20 - 36) x 100/20 = 16 x 100/20 = 1600/20 = 80%