0
What else can I help you with?
What should the gap be for a spark plug in a 2001 CR125R?
.020 - .025
What should the gap be for a spark plug in a 2001 Honda CR125?
.020" to .025"
What are the point and spark plugs gap settings for a 1955 massey-harris farm tractor?
Plug Gap is .025 and Point Gap is .020
What number is a quarter of the way between 4.1 and 4.2?
There is a 0.1 difference between the two numbers. One quarter of that is 0.1/4 = .025. Adding to that to 4.1, the answer is 4.125
What is the correct spark plug fpr a Stihl 029 chain saw?
Bosch 7547 or better Bosch WSR6F. Also good results with NGK BPMR6A. Gap set at .020 to .025 for hot spark.
What is a sthil 025 chainsaw worth?
The value for a Sthil 025 chainsaw depends on its condition. As of 20144, this item in excellent condition is valued between 175.00 and 250.00.
Which is greater 025 or 5?
025 is the same as 25 which is greater than 5
What is .025 of 80?
It is: .025 times 80 = 2
What is the higher milligram 5 or 025?
Wromg question!!!! It should read. Which is greater milligrams 5 or 025'. 'Higher' has a sense of height above the ground, not of greater (heavier) mass(weight). Next '025'. Do you mean '25' , the prefix zero(0) being trivial, or ' 0.25' a decimal. Comparing 25 milligrams is greater than 5 milligram. Algebraically 25mg > 5 mg or 5 milligrams is greater than 0.25 milligrams. Algebraically 5 mg > 0.25 mg.
What is 025 divided by 241003 equals?
0.0001
What is thicker .012 or .025?
.025 is thicker than .012
What does the markings on Charles daly choke tubes mean?
The following choke tubes are available from Charles Daly:Name Constriction Notches Cylinder .000" Skeet .005" | ImprovedCylinder .010" Modified .020" | ImprovedModified .025" Full .035" |External/Extended Tubes Name Constriction Marking:Name Constriction Marking Cylinder .000" CYL Skeet I .005" SK I Skeet II .008" SK II ImprovedCylinder .010" IC LightModified .015" LM Modified .020" M ImprovedModified .025" IM Full .035" F ExtraFull .040" XF XX-FullTurkey .058" PortedAll constrictions are based on nominal bore diameter.
