0
ImproveToughness is the ability of steel to absorb energy.
Hardness is the ability of steels to withstand wear. Hardness is the ability of material to withstand the indent and is measured in rockwel or vickers. also it is a measure of stiffness of material. but hardenability is ability of material to become hardened by various methods of hardening such as carburising or quenching. it is firmly dependent on quantity of carbon in that material. and actually it doesn't have any measuring unit !
Hardness refers to the resistance of a material to indentation or scratching, while hardenability is the ability of a material to be hardened by heat treatment. In steel, hardness is a measure of its strength and wear resistance, while hardenability determines how deep into the material a hardened layer can be achieved after heat treatment.
Add your answer:
Earn +20 pts
How difficult is en31 to machine?
EN31 is considered to be a challenging material to machine due to its high hardness and toughness. Specialized tools and techniques are often required to effectively machine EN31 steel, and it is known to have a tendency to work harden during machining. Proper cutting speeds, feeds, and tool materials are key factors to consider when machining EN31.
Does sperm hardens when it hits air?
Yes, when sperm is exposed to air, it can dry and become clumpy or sticky. This phenomenon is called desiccation, and it causes the sperm to lose its motility and ability to fertilize an egg.
What is thermal softening?
Thermal softening is a process where a material becomes softer as its temperature increases, typically due to the breaking of intermolecular bonds or increased molecular motion. This can lead to reduced strength and stiffness in the material, making it more susceptible to deformation or failure under applied loads. Thermal softening is commonly observed in metals, polymers, and other materials when exposed to elevated temperatures.
How does lubicus help to reduce friction?
Lubricus helps to reduce friction by forming a thin layer between moving surfaces, which reduces direct contact and prevents them from rubbing against each other. This layer reduces the resistance between the surfaces, allowing them to move more smoothly and with less friction.
How much is an ounce of turquoise worth?
The value of turquoise can vary greatly depending on factors such as quality, color, and origin. On average, prices can range from $1 to $10 per carat for lower-grade stones, while higher-quality turquoise can be worth hundreds or even thousands of dollars per carat. It's best to have an expert evaluate your specific piece to determine its value accurately.
What is the difference between Hardness and Harden-ability of steel?
There are some differences between hardness and hardenability. Hardness is the surface property of material to give resistance to the penetration or plastic deformation and it is measured by one of the tests......Rockwell hardness test,Brinell hardness test and Vicker hardness test. On the other hand,hardenability is defined as the ability how the material would be hardened and it is measured by Jominy hardenability test.
How long does it take for clay to harden?
by not leaving the substance in a moist environment and by putting it into a stove and leaving it their for about 2-3 days on a very high temperature.
The Incas used what material to help harden the metals they used in their art?
The Incas used a technique called "cementation" to harden metals like gold and silver for their artwork. This involved heating the metals with a mixture of lime and ash, which helped to increase their hardness.
What does plasticity mean?
A plastic which will soften when heated and harden when cooled.
Is there a way to harden the wood of a Tulip Poplar tree as it grows?
There is no way to harden the wood of a Tulip Poplar tree as it grows. Wood cannot be hardened until after it is harvested, at the time of harvesting and cutting, it may be treated with chemicals or sealants that make the wood stronger.
What hapenns when you harden talc and diamond?
Talc and diamond are naturally occurring minerals with very different hardness levels. Hardening talc would involve some form of chemical treatment to make it more resistant to scratching and abrasion. In contrast, diamonds are already the hardest natural substance, so there is no way to further harden them.
What chemical reaction makes the Shake-N-Cast harden?
The chemical reaction that makes Shake-N-Cast harden is a hydration reaction between the product and water. This reaction forms a strong bond between the material particles and creates a solid and durable structure.
What is the present tense of harden?
The present tense of "harden" is "harden." For example, "The clay hardens as it dries."
How is Ionic plating used in making stainless steal jewelry?
In stainless steal jewelry Ionic plating is used as corrosion inhibition, to improve solder ability, to harden, improve wear ability and also gives a finish.
How much is a signed rich harden baseball worth?
How much a signed Rich Harden baseball is worth depends on the condition of the ball. Its value is generally between 35 and 155 US dollars.
Is harden a verb?
Yes, harden is a verb.
Is harden an adjective?
No. The word "harden" is a verb.
