what is the diference between 12V 15A DC coil & 12V 10 amps DC coil
Current carrying capacity is different.
Yes as long as you change the 50 amp breaker to a 15 amp breaker. You will be hard pressed to get the 50 amp #6 wire under the terminals of the 15 amp receptacle.
A #14 copper wire rated at 15 amps is the minimum size wire for a 15 amp receptacle.
You have to rewire the circuit completely with 10 AWG wire and replace all outlets and switches with devices rated at 25 Amps. Note 25 Amp breaker is an unusual size. 10 AWG will go up to 30 amps, and that would be the way to go.
Yes, if you are using AWG # 10 wire. If you are using AWG # 12 then the answer is no you must use a 20 amp breaker. On AWG #14 wire you must use a 15 amp breaker.
Current carrying capacity is different.
The 13 amp fuse with blow at the lower rate to the 15 amp fuse. And At 15 amp the motor is normally more powerful - check the wattage used in both
The main difference between a GFCI 15 amp and a GFCI 20 amp outlet is the maximum amount of electrical current they can handle. The 20 amp outlet can handle higher power loads compared to the 15 amp outlet.
15
The main difference between a 15 amp and a 20 amp GFCI is the amount of electrical current they can handle. A 15 amp GFCI is designed for circuits with a maximum capacity of 15 amps, while a 20 amp GFCI is designed for circuits with a maximum capacity of 20 amps. This means that a 20 amp GFCI can handle higher power loads than a 15 amp GFCI.
The main difference between a 20 amp and a 15 amp GFCI outlet is the amount of electrical current they can handle. A 20 amp outlet is designed to handle higher electrical loads than a 15 amp outlet, making it suitable for appliances and devices that require more power.
10 is a positive number, -15 is a negative number. Also... The difference is 25, -15 is 25 less than 10.
4
The main difference between a 15 amp GFCI outlet and a 20 amp GFCI outlet is the amount of electrical current they can handle. A 15 amp GFCI outlet is designed for circuits with a maximum capacity of 15 amps, while a 20 amp GFCI outlet can handle circuits with a maximum capacity of 20 amps. It is important to match the outlet amperage with the circuit capacity to ensure safe and proper functioning.
The maximum amperage capacity that can be safely connected between a 20 amp breaker and a 15 amp outlet is 15 amps.
!0 amp breakers have not been used for quite some time . NEC made 15 amp the minimum requirement for 110/120 VAC circuit breakers a long time ago. If the breakers are only 10 amp, then those outlets can only carry 10 amps max.I would call an electrician. Your electrical service is terribly out of date and, in my opinion, inadequate and unsafe.
Fuse & Circuit Breaker Identification (Driver side panel) 1 - 10 Amp Power Mirror 2 - 10 Amp Air Bag System, Blower Relay 3 - 15 Amp Parking Lamps 4 - 15 Amp Left Headlamp 5 - 10 Amp OBDII System 6 - 15 Amp HEGO System 7 - 10 Amp Illumination Switches 8 - 15 Amp Right Headlamp , Fog Lamp System 9 - 10 Amp ABS System 10 - 10 Amp Speed Control, GEM System, Brake Interlock 11 - 10 Amp Warning Lamps 12 - 10 Amp Front washer System 13 - 15 Amp PCM System, Stop Lamps, 4-Wheel Drive, ABS, Speed Control 14 - 10/20 Amp ABS System 15 - 15 Amp Air Bag System, Alternator 16 - 30 Amp Front Wiper 17 - 30 Amp Cigar Lighter 18 - 15 Amp A/C System 19 - 25 Amp Ignition Coil, PCM System 20 - 10 Amp Radio, GEM System, Anti-Theft 21 - 15 Amp Hazard Lamps 22 - 15 Amp Turn Signals 23 - Not Used 24 - 15 Amp Starter Relay, Anti-Theft 25 - 10 Amp Speedometer, GEM System 26 - 15 Amp 4R44E/4R55E Overdrive, Back-up Lamps 27 - 15 Amp Under Hood Lamp, Map Lights, Glove Box Lamp, Dome Lamp, Visor Lamps, 4X4 System 28 - 10 Amp GEM System 29 - 15 Amp Audio System 30 - Not Used 31 - Not Used 32 - 10 Amp Not Used (Spare) 33 - 20 Amp High Beam Lamps 34 - Not Used