These are basics that any tattoo apprentice would be taught in the very beginning.........So check with the persons who sold you the starter kit...
WHAT AN IDIOT AND DUMB ANSWER
You should wait about 15-30 minutes before wiping off excess grout from the tiles. This allows the grout to set and firm up before cleaning.
you can't do that. you will need wiping the whole device..
Yes, if it's a gel stain. However, if it's a penetrating stain it will not dry correctly. If you try to clean it, it will smear. If you put a clear topcoat on it, the topcoat will smear the excess stain.
Not Possible
i would start by wiping off excess, than an all purpose cleaner till clean you might have to repaint
Of the two...green soap. But I use neither for stencil purposes, as I'm sure that's what you are asking this for. Instead, it is better to use a stencil solution. A good solution will keep the stencil on the skin for the duration of the whole tattoo, even if you are constantly wiping (which really you should dab the puddle rather than wipe). Find and buy an antiseptic disenfectant called Dettoll, it is sold in most drug stores and pharmacies, and mix 1 part of Dettol to 7 parts equal distilled water. Voila! Great and easy solution.
Pooping without wiping and using the terd as sidewalk chalk
there is no other way to fix it.
A damp cloth is a cloth that has been slightly wetted with water, but not excessively soaked. It is often used for cleaning surfaces or wiping down objects as it can help remove dirt, dust, or spills without leaving excess moisture behind.
you can't it's currently impossible
Pretty much the same way you would do it on human skin. Prick holes in the instrument with a sharp tool and rub ink or paint into the holes, wiping off any excess.
just don't click your mouse until you have coasted past it.