0
You need a float brush and grout. You want to make sure you have the right kind of grout. For example, you might want a sanded grout for larger grout spaces. Apply the grout with the float at a 45 degree angle, wiping as much off as you go. After it sets, use a sponge to wipe the haze from the tiles.
Add your answer:
Earn +20 pts
Can you grout a floor if a tile is loose?
You risk having the loose tile cause the grout to chip out. Find a way to secure the tile first.
How do you tile a bathroom?
To tile a bathroom, you must first find the center of the floor or wall. This is where you will lay your first tile. You work out from there. This way you have the cuts where they are less noticeable. Use a trowel to place tile glue on the tiles, put them in place. Use spacers to keep them apart at an equal distance. Use a tile cutter to cut tiles in areas where a whole tile is not needed. Once you are done, remove the spacers and use a trowel to grout between the tiles. Wipe away excess grout with a wet sponge.
How do you apply ceramic tile on drywall?
It's no different on drywall than it is on any other surface. You spread the cement the same way, you apply the tile the same way.
Is there any possible way to install marble tile without grout lines?
You are going to have a seam one way or another. But the bigger the slab of marble, the fewer seams. And you can use an epoxy to fill the gaps, but it will still look like a seam. And without the grout, you can have some serious expansion problems.
Can you tile on top of tiles?
yes you can, but that doesn't mean that it's the best solution. the best way is to remove the old tile. period.
Can you grout a floor if a tile is loose?
You risk having the loose tile cause the grout to chip out. Find a way to secure the tile first.
What is a cheap way of cleaning ceramic tile grout?
A cheap way of cleaning ceramic tile grout is to use bleach and baking soda mixed with water and a toothbrush to scrum between tiles. One can also use a steam cleaner.
Can water be leaking through the grout of a second floor bathroom tile floor?
== == Water can very well find it's way through the floor. It is usually at areas where the tile meets a vertical area at a shower or tub. Movement can occur in these areas. It is best to caulk joints such as these, instead of grout. The caulking will flex, but the grout will crack and allow water to penetrate.
How do you plug whole in ceramic tile?
The only perfect way to repair a tile with a hole in it is to replace it. The second best way is to simply fill the hole with grout. This isn't a pretty repair, especially on dark colored tile, but it will at least stop water from getting behind the tile and turning a small problem into a large problem.
What are the best ways to clean grout in the home?
Depending on the severity of the grout stains, one economical way of keeping grout clean is with white vinegar diluted with water. If this doesn't do the job, you can purchase commercial tile and grout cleaner in any home improvement store. For the most severe grout stains, you can try chlorine bleach, or oxygenated powder, such as Oxyclean or even hydrogen peroxide.
Best way to replace grout?
The old grout can be cut out. The mist efficient way is with an oscillating tool with a grout blade. After the old grout is removed then new grout can be installed. This is a time consuming project.
What causes hairline cracks in the grout around ceramic tile within a few months of installation?
There are a number of things that causes hairline cracks in the grout around ceramic tile. When it happens within a few months of installation the reason could be that your grout was not installed in the proper way. If it is not installed correctly, it shrinks as it dries and cracks.
What is the proper way to dispose of damaged ceramic tile?
Remove the old ceramic tile starting at one of the edges. The best place to begin is where the old ceramic tile butts up against a different type of flooring, such as a carpet or wood floor. Chip away at the grout surrounding the old ceramic tile, using a metal putty knife and hammer. Set the putty knife on the grout and hit the top of the putty knife with the hammer. Work your way around the first tile pegged for removal.2 Slip the blade of the putty knife under the ceramic tile after loosening the grout. Apply pressure to the handle of the putty knife and pop out the old ceramic tile.3 Chip the grout away from the tiles and pop the tiles out, using the putty knife, until you have removed all of the old tiles.4 Vacuum the area with a wet/dry vacuum to remove any residue.
What is the best way to clean grout on a kitchen floor you have a kitchen that has been closed for twenty years?
only professional tile installer/repairer can do good work. spend money and hire one
What is best acid mixture for cleaning grout off tile?
A mixture of vinegar and baking soda can be an effective and natural solution for cleaning grout off tile. The acidity of the vinegar helps to break down grime and stains, while the baking soda acts as a gentle abrasive for scrubbing. Just be sure to test the solution on a small, inconspicuous area first to ensure it doesn't damage the tile.
How do you tile a bathroom?
To tile a bathroom, you must first find the center of the floor or wall. This is where you will lay your first tile. You work out from there. This way you have the cuts where they are less noticeable. Use a trowel to place tile glue on the tiles, put them in place. Use spacers to keep them apart at an equal distance. Use a tile cutter to cut tiles in areas where a whole tile is not needed. Once you are done, remove the spacers and use a trowel to grout between the tiles. Wipe away excess grout with a wet sponge.
How do you make a table top with broken dishes in plaster?
Using a hammer and cloth or bag, break the dishes into pieces. Then arrange the pieces on the table top to get the look you want. Once you have the pieces the way you want them, number then and remove them from the table top. To adhere the plate pieces to the table, spread an even coat of tile adhesive over the table surface using a trowel. Reposition the plate pieces on the table. Be sure to work in manageable areas, as the tile adhesive will set up fairly quickly. As each plate piece is places in the tile adhesive on the table, give it a small twist and even pressure to ensure adhesion. After all plate pieces ore positioned in tile adhesive on the tile, allow it to dry for a minimum of 24 hours. Then spread grout over the table, being sure to completely fill spaces between the plate pieces. A tile float makes this easier. Once the grout is applied, wipe off any excessive grout with a damp cloth. Allow the grout to dry throughly, then apply a sealer over the table surface. msummy www.creativity-in-glass.com
