Wiki User
∙ 2011-04-10 02:43:023.50 per sq. ft.
Wiki User
∙ 2011-04-10 02:43:02The average labor price for installation of prefinished wood flooring is $2.00-$3.50 per square foot. The average prices to install, sand and finish unfinished wood flooring is $4.00-$7.00 per square foot.
In southeastern PA, the cost of installing porcelain tile should begin around $4.00 per square foot. This price represents a basic installation of simple 12 X 12 tile over a smooth, flat concrete surface. Upgrades would include a large format tile (larger than 12 X 12), a patterned installation, or any special considerations such as expansion joints and transitions. If the tile is being installed over a plywood sub-floor, an approved cement or fiber-cement based subfloor must be installed prior to the installation of the tile. This labor charge usually runs about $2.00 per square foot (materials are additional). Grout installation is included in the tile installation labor charge. Installation of tile on walls in showers and kitchens is usually higher and usually requires a site visit prior to pricing.
Skylight installation labour costs can vary depending on a few factors. Obviously the size of the skylight is the first variation, but then other factors like roof type and length of shaft come into consideration. Most skylight installations take up to 2 - 3 hours to install, ranging up to 5 hours for the larger skylight installations. So you can expect to pay labour from $100 up to $300 depending on the installation chosen. In summary you are looking at an of average of approximately $200 labour charges per skylight installation
$3 dollars per square foot labor $1 dollars average material cost per square foot Add for hourly labor costs for sub floor prep work $4 - $5 dollars average cost for labor and materials 20% - 40% average profit margin, varies with workforce wages
45 to 65 cents a sq ft
4 to 5.00 per sf
average in southeast is around $5 per square foot anything better than that is a good deal
3-6 dollars a square foot depending on substrate and custom work
Depends on several factors: Type of tile Sub-flooring Straight Lay/Offset Angle, Pattern Size of Job
$75 hr
4.75 ayard
12.00 labor a sheet
As of 2014, the average installation price per sq ft of fiberglass insulation is $0.76. This is based on labor productivity rates and national average hourly labor wages.
About $3/ Sq ft
5- 7 bucks a SF and most guys charge a minimum fee. Example average kitchen backsplash is 30 Square feet 210.00 wouldn't be worth doing most tile guys minimum charge is 350.00-400.00 Here in Chicago the average price for installation of your ceramic tile should be about 5.50 per S/F straight lay out and $ 6.50 for 45 degree lay out but thast if is ceramic quarry tile and if is a porcelain tile is about $ 7.00 dollar per foot if is a shiny tile. There is no real average because so many variables are involved such as: Types of substrates i.e.. Wood, Concrete, Gypsum screed will require different types of installation methods. For instance an uncoupling membrane or anti-fracture membrane would be highly recommended over most concrete slabs. This would substantially increase your labor costs. Types of Tile: Stone, Glass, Porcelain, Quarry, Ceramic all require different installation methods and installation materials that can alter the cost of labor. Other factors that may affect the price are if the installer includes cement board and mortar. These materials can be costly and if included make sure you factor that in. A 100 square foot floor should run 600-700 dollars Wall Tile can be more.
yes
Labor costs for installing a Pergo floor will be determined by how long the job takes. Typically a six hour Pergo floor installation will cost $400 in labor.