8 sq ft: 16 ft^3/2 ft=8ft^2 8 sq ft: 16 ft^3/2 ft=8ft^2
A cubic measurement is a volume measurement. To calculate volume, multiply Area x Height (or Depth).
"Area" is an amount of flat surface. It has no volume. If the area is the bottom of a tank, then the volume of the substance in the tank is the area multiplied by the depth.
The answer depends on the shape of the pool. If the pool is of uniform depth, then its volume is the surface area times the depth. If the surface area is measured in square feet, and the depth is measured in feet, then the volume is in cubic feet.1 cubic foot = 6.2288 Imperial gallons.
Volume = (area of the bottom) x (depth)Area of the bottom = (pi R2) = 9 pi square feetVolume = 1.5 x 9 pi = 13.5 pi = 42.4115 cubic feet (rounded)= 317.3 gallons (rounded)
Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth. A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.
Volume= surface area (length x width) x depth re arrange to surface area= depth= Volume/Area Area= Volume/Depth
The area 90 square meters times 0.075 meters gives a volume of 6.75 cubic meters.
Surface area is two-dimensional. Volume has a third dimension: depth.
To get the average depth, take the volume and divide it by the surface area. For this question, first convert litres into cubic kilometres. Then take this value and divide it by the surface area. You could also convert the volume to cubic metres and the surface area to square metres, but it might be more tedious.
The volume could be defined as the area multiplied by the depth. However, it has to be the average depth.
Find the surface area of the top or bottom face and multiply that by the depth of the prism. For example, a triangular prism would have a volume of (1/2 * base * height) * (depth)
They do not directly convert. Cubic feet is a measure of volume while square feet is a measure of area.