Hi everybody
the difference between VTP version 1 and version 2 are :
1- version 1 : it supports Token Ring Vlans
2- version 2 : it supports consistency checks .it means , when the new information about the VTP domain is entered through the command line or others as SNMP ,VTP version 2 will perform the consistency check . in VTP version 2 , if a switch is in transparent mode .it will forward the message without checking version information .
H1 bulbs have 2 spade connector and the H7 bulb has 1 spade connector
1. Nominal capacity is volume from the bottom up to the top of the shell 2. Working capacity is volume between LLL and HLL
the difference between -2 and 8 Celsius is 10 degrees Celsius
About 2 inches
there 2 different things genius , Google it!
Layer 2 multicast. vtp is stopped at the router.
A switch running in VTP Transparent mode will not participate in VLAN synchronization. With VTP version 2, it will forward VLAN traffic out its trunk interfaces.
1. The difference of two numbers are the numbers between them. The difference is found by subtracting the smaller number from the larger. In this case, 2 is subtracted from 3 (3-2) with a difference of 1. 3-2=1
The difference is 3 1/4.
The difference is 2 and 7 eighths.
The difference between -25 and -11 is 14.
4x8=32 1/4x8=2 The difference between 32 and 2 is 30.
2
6
1 and 2 beats
2
1