This depends...Bruce and most solid hardwood 3/4" thick needs a 3/4" expansion joint at the wall. Other types of wood, engineered and floating can vary. Typically it is between 1/4" and 1/2". The install instructions should state.
While you can use a hardwood floor cleaner on any type of floor, it will only be effective on hardwood. It won't really help on carpet, and in some cases may damage the carpet.
does birch hardwood scratch easy
It's not always necessary to use hardwood floor cleaner on hardwood floors. While dedicated hardwood floor cleaners are designed to be gentle and effective, you can also maintain your floors using a damp mop with water and a mild pH-balanced soap. Avoid using excessive water or harsh chemicals, as they can damage the wood. Regular sweeping or vacuuming to remove dirt and debris is also crucial in preserving the beauty and longevity of hardwood floors. However, for specific stains or deep cleaning, a hardwood floor cleaner can be a helpful option, but it's not always mandatory for routine maintenance.
Yes you can as long as you are not concerned about damaging the underlying floor. If the floor is old and the finish in unimportant to you, you are fine. If you are looking at steam cleaning an area rug which is on a hardwood floor, that's a definite no-no and the as the water and steam can stain or buckle the hardwood.
Yes, you can install a laminate floor system over existing hardwood floors. Just be sure that the existing hardwood is pretty smooth or the hump in the floor will transfer through. You must use a vapor barrier over your existing hardwood to reduce sound as well as moister transfere between two floor systems. Be sure to let your new floor acclimate to your room temp. for at least 48 hrs. this is especially important if you are installing floor in the winter.
I just bought a haunted house and need to redo the floors. Is there a guide to hardwood floor installation?
Our hardwood floors need refinishing. Do you know someone who can do this?
To install hardwood, first you need a bare floor, then you install the lined paper barrier, then you nail in the hardwood strips, sand it down, and then add a finish such as poly.
To install a floating hardwood floor over concrete, you will need to first ensure the concrete is clean, dry, and level. Next, lay down a moisture barrier and underlayment. Then, click or glue the hardwood planks together, leaving a small gap around the edges for expansion. Finally, trim the edges and add finishing touches.
You will need a reducer initially, most hardwood floors come with a matching one.
To efficiently remove hardwood floor, you will need tools such as a pry bar, hammer, utility knife, floor scraper, and possibly a circular saw. These tools will help you to carefully and effectively remove the hardwood floor without causing damage to the subfloor.
To replace a hardwood floor, you will need to remove the existing flooring, prepare the subfloor, choose and install new hardwood planks, and finish the floor with stain and sealant. It is recommended to hire a professional for this job to ensure proper installation and a high-quality finish.
Bona Hardwood Floor Polish is environmentally friendly and can maintain any hardwood floor.
I have some lovely hardwood floors in my house but they need some attention as they are looking a bit worn out in places. Where can I find a website that specialises in hardwood floor refinishing so that I can get some advice?
Bruce hardwood floor cleaner is the best hardwood floor cleaner for day to day use.
Engineered hardwood floors can be floated, but not solid hardwood floors.
You can find the nearest hardwood floor outlet at insert location.