A1 and A2 are control circuit to energised the magnetic coil. A1( Life ) from Switch and A2 (Neutral) from Distribution box. Am I Right?
A1' and A2 are terminals on auxiliary contacts used in electrical circuits, typically associated with relays or contactors. A1' generally represents the positive or input terminal, while A2 is the negative or return terminal. These terminals are crucial for controlling the operation of the relay or contactor, enabling the switching of larger loads based on a smaller control signal. Proper connection of A1' and A2 ensures the correct functioning of the auxiliary contacts in the circuit.
The incoming voltage from the source goes to L1,L2 and L3 terminals. The Load connects to T1, T2, and T3. The coil voltage goes to A1 and A2. The stop ,start circuit is in series with the N.C. contacts on the contactors overload block. Usually numbered 95 and 96.
The mean of the numbers a1, a2, ..., an is equal to (a1 + a2 + ..., + an)/n. This number is used mostly as the average. It is called the arithmetic mean.
The simplest and best way is: =A1+A2 You could also do it any of the following ways: =SUM(A1:A2) =SUM(A1,A2) =SUM(A1+A2) =SUBTOTAL(9,A1,A2)
numbers: =A1+A2 text: =A1&A2 or =A1&" "&A2
(a1+a2+....+am )2
Excel formulas that will find the average of cells A1, A2, and A4 are: =AVERAGE(A1 ,A2, A4) or =AVERAGE(A1:A2, A4)
There is no cell A1A2. What you may mean is A1:A2 which refers to the range consisting of cell A1 and cell A2.
While there are many ways of doing it, the simplest way is to use the SUM function and a range in it like this: =SUM(A1:A5)
There following two options should work:=sum(A1:A3) or=A1+A2+A3
A2 is the biggest then A4 then A1
a2