0
What color is the ant wire for the pn-9945m for the clarion cassette player?
Wiki User
∙ 15y ago
White=left front +
White/Black=left front -
Gray=right front +
Gray/Black=right front -
Green=left rear +
Green/Black=left rear-
Violet=right rear +
Violet/Black=right rear -
POWER/ACCESSORY
Yellow 14ga=battery main/memory
Yellow 18ga=battery CeNet power/memory
Red=accessory (ignition on)
Black=ground
Blue=antenna turn on +
Blue/White=remote turn on (amps) +
Orange/White=dimmer
Brown=phone mute
Orange=parking brake video lockout
White/Red=CCD (camera) input instant on +
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the wiring color code for a Clarion 7770 stereo?
The wiring color code for a Clarion 7770 stereo is red and black.
Clarion adx5555z color code wiring?
You can find the Clarion adx5555z color code wiring online at places like The 12 Volt and Team Clarion. You can also find the wiring coding at stores that sell and install Clarion stereos in the manuals.
What are clarion car stereo colours?
It may be related to the colors of the wires for color coordination when installing the Clarion deck.
Wiring diagram for a clarion RDB465D?
Ok I have a clarion head unit model number RDB465D but I don't know the color code for what the are for like example the left speak the positve and negative and ect if you could please help me out with this
How to Install a Cassette Player In Your Car?
Still have those cassette tapes and want to play them while you drive? Is your car lacking the proper cassette player? No worries, this article will walk you through the simple steps of how to install a cassette player in your car. Because cassette players are now considered older technology, you need to be sure that it will fit in your dash before you purchase it. Before you start this task, gather the appropriate tools and other items that you will need. Gather a screwdriver, a soldering gun, wire crimps, the cassette player and the user manual. Take a few minutes to review the user manual before you start installation. Next, follow appropriate safety precautions such as turning off your engine and disconnecting the negative terminal on your battery. In the dashboard of your car, there is a stereo face that has to be removed, which sometimes involves a button or sliding mechanism to loosen it before pulling it off. Disconnect the existing antenna wiring. You’ll have to purchase and install a special mounting pod under the dash if your car does not have an existing radio or a space to fit one. Get the cassette player out of its packaging and turn it around with the wires facing the dashboard. The speaker wires will plug into appropriate positions on the face piece of the cassette player. Usually, there’s a diagram that shows you where the speaker wires should be plugged. Wiring is usually color-coded. Next, thread the power wire and antenna wire into the cassette player face piece. You can test the power to the cassette player once these wires are connected firmly. You can’t mount the cassette player into the dashboard until the wires are connected per above. Once that’s accomplished, insert the cassette player into the original position of the car stereo that was in the dashboard. That’s it! Now you have a cassette player in your car that will allow you to enjoy your favorite music while you drive. If something doesn’t seem to be working, consult the user manual and/or call the tech support number provided in the manual.
What are the color codes for a 1994 Chrysler Concord with a Dolby cassette radio?
TRY THIS LINK IT WORKED FOR ME. www.installdr.com/Harnesses/DCP-Wiring.pdf
What is dual CD player wire color codes?
What is dual CD player wire color codes?
Change Audi cassette player to CD player?
take off the dash then you need to unscrew the CD player and pull out the wire. (make sure that you have the harness for the new CD player and for the car.) splice the old wires and reatach them with the new harness wires,(they should be color coded and matched) then plug the new car adapter harness into the harness for the CD player. After all that, plug your antenna adapter into the back of the CD player and then screw everything back in. Note that you might need the dash installation kit, because usually the CD players are smaller than the stock players. -Shocker
How do you replace the cassette player in a 2001 Nissan quest with a CD player?
take off the dash then you need to unscrew the CD player and pull out the wire. (make sure that you have the harness for the new CD player and for the car.) splice the old wires and reatach them with the new harness wires,(they should be color coded and matched) then plug the new car adapter harness into the harness for the CD player. After all that, plug your antenna adapter into the back of the CD player and then screw everything back in. Note that you might need the dash installation kit, because usually the CD players are smaller than the stock players. -Shocker
How do you change over the factory cassette player to a CD player in a 1993 suburban?
take off the dash then you need to unscrew the CD player and pull out the wire. (make sure that you have the harness for the new CD player and for the car.) splice the old wires and reatach them with the new harness wires,(they should be color coded and matched) then plug the new car adapter harness into the harness for the CD player. After all that, plug your antenna adapter into the back of the CD player and then screw everything back in. Note that you might need the dash installation kit, because usually the CD players are smaller than the stock players. -Shocker
How do you remove the factory cassette player and replace with CD player in a 1999 ford escort?
take off the dash then you need to unscrew the CD player and pull out the wire. (make sure that you have the harness for the new CD player and for the car.) splice the old wires and reatach them with the new harness wires,(they should be color coded and matched) then plug the new car adapter harness into the harness for the CD player. After all that, plug your antenna adapter into the back of the CD player and then screw everything back in. Note that you might need the dash installation kit, because usually the CD players are smaller than the stock players. -Shocker
How do you remove the factory cassette player and replace with after market CD player in a 1999 vw jetta?
take off the dash then you need to unscrew the CD player and pull out the wire. (make sure that you have the harness for the new CD player and for the car.) splice the old wires and reatach them with the new harness wires,(they should be color coded and matched) then plug the new car adapter harness into the harness for the CD player. After all that, plug your antenna adapter into the back of the CD player and then screw everything back in. Note that you might need the dash installation kit, because usually the CD players are smaller than the stock players. -Shocker
