how do you bypass passlock system
It does have the passlock system, what is the question?
Smash the window
You really can't turn it off. They sell bypass kits, but the passlock system has to be working in order for the bypass thing to work.
yes you can easily disable this passlock system. simply cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire. dealer says it cannot be done, they lie however.
Hit it hard with a hammer.
go to tube sound.com to disable passlock system for good. (just type in problem). type in tubesound.com/passlocksystem. have a good day!!
cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire.
Cutting the yellow wire may disable the passlock system, but you might need to reconnect it depending on the type of vehicle and passlock system. It's important to consult a professional or refer to the vehicle's manual for specific instructions to ensure safe and proper handling.
no pude arrancarlo
The thing that causes the PASSLOCK to activate is the chip, if you will. If the chip is bad, ar is unrecognizable to the system, the PASSLOCK will activate. Take it to a dealer asap. You can bypass the passlock by accessing the ignition, and cutting the yellow wire of a small 3 piece wire set that's on top of the ignition. cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire.
Passlock is an theft deterrent system introduced by GM in 1996, designed to prevent vehicle operation if the proper ignition key is not used to start the vehicle (passlock wasnt used in s-series until the '98 model). The Passlock Anti-Theft system involves resistor codes which are generated by resistors located in the ignition key cylinder switch.