Probably a rather philosophical question, but if you want to make a quote it is the difference between an architect and a construction worker. Engineers design a framework and decide how the building works in its entirety and how it interconnects with the outside world and programmers execute the master plan, putting up the walls and installing the plumbing and electricity.
A reversible process is one which can be reversed and causes no changes in the system or surroundings. For a process in equilibrium, the rate of the forward process equals the rate of the reverse process (which can be, but is not necessarily equal to zero).
The ammeter is connected in different way in forward and reverse bias zenner diode. So that all of the board will work right going forward and reverse.
Both are 1.0 AMP SILICON S general purpose ,Low forward voltage drop. High surge current capabilityRECTIFIER.The only difference is in the maximum repetitive reverse voltage which is 1N4001 has a maximum repetitive reverse voltage of 50 V, 1N4007 is 1000V. Otherwise they are the same. There must be a fault in the circuit which caused the burn-out.
A forward reverse star delta is a two in one motor starter where a motor first runs on star connection and then changed to delta connection after a time which has been set. The motor direction can be changed, whether forward or reverse
Reverse Engineering requires manufacturing and operational tolerances to be calculated. It can also include recalculation of materials and seals.
Forward lookup is name-to-IP address; the reverse lookup is IP address-to-name.
Forward kinematics calculates the end-effector position of a robot based on the joint angles. Reverse kinematics, on the other hand, determines the joint angles required to position the end-effector at a desired location. Essentially, forward kinematics looks at the robot from joint angles to end-effector position, while reverse kinematics works from end-effector position back to joint angles.
Probably a rather philosophical question, but if you want to make a quote it is the difference between an architect and a construction worker. Engineers design a framework and decide how the building works in its entirety and how it interconnects with the outside world and programmers execute the master plan, putting up the walls and installing the plumbing and electricity.
A reversible process is one which can be reversed and causes no changes in the system or surroundings. For a process in equilibrium, the rate of the forward process equals the rate of the reverse process (which can be, but is not necessarily equal to zero).
A forward auction is the "ordinary auction" we are all used to today. In a forward auction, the buyer bids on the sellers item, and the prices of the item increases during the auction. On the other hand, a reverse auction switches the roles of the buyer and the seller. In a reverse auction, the sellers are competing for the buyers business, and the prices of the items the sellers are selling decrease during the auction.
difference between laminar air flow & reverse laminar air flow
There is none
1. Reverse engineering is the process of generating the technical data required to duplicate a product functionally and dimensionally. 2. Reverse engineering is the process of analyzing a subject system to create representations of the system at a higher level of abstraction. 3. Reverse engineering is an element of product redesign, improvement and evolution. 4. Reverse engineering is the development of an operational understanding of a product. 5. Reverse engineering is the process of benchmarking a product's cost, performance and functionality. 6. Reverse engineering is a way to teach the engineering design process in a hands-on, intuitive way.
Your arctic cat 580 will go in reverse and not forward because the reverse linkage is okay while the forward linkage is not.
the normal is regular and a reverse is better
Nothing