These are the 2 terms used in describing the rifling found inside the barrel of a firearm.The word lands refers to the raised portion of the rifling,and the grooves refers to the lower portion of the rifling.By applying a hole micrometer you may determine the caliber of your firearm by measuring the distance between the 2 lands,and measuring the distance between 2 grooves.if you then compare the measurements you will find the true caliber of your firearm.
Barrels have lands and grooves, not ammunition.
Lands and grooves.
Lands
When rifled, the rifling tool cuts the GROOVES. Material left between the grooves is the LANDS.
Lands
Can be either or both.
If the questions is referring to the tube, then only one.
Need to know the model and claiber.
Lands and grooves aka rifling
The spiral grooves in a guns barrel are known as rifling. Its what puts a spin on the bullet as it leaves the barrel for accuracy. The grooves are called..... well, grooves. The ungrooved part between grooves is called a land. So looking through the barrel of a rifled firearm, you will see the "lands and grooves" that make up the rifling.
The spiral grooves in a guns barrel are known as rifling. Its what puts a spin on the bullet as it leaves the barrel for accuracy. The grooves are called..... well, grooves. The ungrooved part between grooves is called a land. So looking through the barrel of a rifled firearm, you will see the "lands and grooves" that make up the rifling.
The metal ridges between the spiral grooves on the inside of a rifle barrel are called lands. They are part of the rifling, which imparts a spin to the bullet as it travels down the barrel, enhancing accuracy and stability in flight. The grooves are the recessed areas that help guide the bullet, while the lands engage the bullet, ensuring a tight fit and promoting a more consistent trajectory. Together, lands and grooves are essential for improving the performance of a firearm.