There are many factors that can have an impact on fuel costs, value however is whatever you think it is. Some of the factors that influence the price of fuel however are: The level of supply (which is politically determined). The level of demand (which is seasonal). The price of Oil (which comes with another group of factors I wont go into). The cost of refining oil into the relevant fuel. The availability of refining capacity. The the cost of transporting fuel. The cost of ditributing fuel. Any Tax added to fuel (either at sale or at any other point). The profit margin expected by the distributer (and any other party in The supply chain).
20 (twenty) ounces of oil. A quart is 32 ounces. 4 quarts per gallon = 20 quarts = 20 ounces.
an aeroplane makes use of hydrogen gas because its the best fuel and has a high calorific value....in fact it is the best fuel till now.... arbaz saleem 8th h delhipublic skool srinagar kashmir
the best fuel is farty fuel
Wood is a fuel as it can provide energy by burning. But, it is not formed by fossils and hence not called a fossil fuel.
#2 fueloil is 140,000btu per gal. Propane is about 79,000btu per gal. check with local propane supplier but 78k-79k per gal rings my bell. geterdone
sfvrygtrhyn6ki8ol9;pthyt
The commercial value of kerosene is determined by factors such as supply and demand, production costs, and market conditions. Its primary uses in industries such as aviation, heating, and lighting contribute to its market value. Additionally, geopolitical factors can also influence the price of kerosene on the global market.
Factors that influence flame height include the amount of fuel being burned, the rate at which it is being burned, the presence of oxygen for combustion, and environmental conditions such as wind speed and direction. Additionally, the type of fuel being burned and the shape and size of the flame source can also impact flame height.
There is no set relationship between cc and hp. there are many factors that influence it, such as fuel type, compression ration and ignition temperature.
Factors affecting fire development include the availability of fuel, oxygen, and heat. The type and amount of fuel present, ventilation, and external heat sources can all impact the rate at which a fire spreads and grows. Additionally, environmental conditions such as wind speed and humidity can influence fire behavior.
Methane Gas has the highest Fuel value.
Technological advancements: Improvements in extraction techniques can lead to increased production. Economic factors: Market demand, commodity prices, and investment in infrastructure can impact production estimates. Environmental regulations: Regulations on emissions, exploration, and extraction can affect the viability of fossil fuel production.
For a fire to occur, two factors are needed: fuel and heat. The fuel provides the material that can burn, while heat is required to reach the ignition temperature of the fuel and start the combustion process.
A good fuel is a fuel with a great calorific value; this fuel contain more energy in the unit of mass, it is more economic.
A lot of factors influence "horsepower" including fuel, elevation, weather and performance modifications made to the bike. The stock Polaris Predator is said to have a a rating of 38 to 42 horsepower at the wheels.
The electrical conductivity of fuel oil can vary depending on its composition, but typically falls in the range of 10-200 picosiemens per meter (pS/m). This measurement may also be influenced by factors such as temperature, impurities, and additives present in the fuel oil.
If it is four or five turns of the starter normal. If it is four or five times that you turn on and stop then try again, usually loosen fuel pressure. Leaking fuel injector or a fuel pump leaking down.