0
Add your answer:
Earn +20 pts
How high or low should the tattoo power supply box be set at?
It depends on what yours using it for. I use 12 ish
I have an amp running a set of 6X9 but when you turn it up the they keep cutting on and off it has its own battery supply and the RCA'S are running throw another amp any ideas?
It sound like not enough power going to the amp. Check your connections again.
What does a tattoo kit include?
It include as follow:tattoo machine,grips with back stem,tattoo power supply with power cord,plastic foot switch & black clip cord,a set of tattoo ink,ink cup holder,ink cups, tattoo needles,tattoo nipples,rubber O-rings & rubber bands,gloves,A & D Ointment,practice skin,tattoo CD,tips,a sets of adjust tools and other attachments,brushes cleanliness and so on.
Can a 1200 watt amp power a 300 watt box?
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
How do you connect two amps to four subs?
Run a 2 sub per amp set-up. Get a distribution block for you power wire to split the power wire. You can run the remote wire from your stereo to one amp and then from the amp to the other amp. you will also need 2 sets of RCA's Easy way is too get a 4 channel amp to power 4 subs.
What power do you set your tattoo machine?
The tattoo power supply should be set under 3V for machine. some useful parameter: Tattoo machine: 3-15V, Starting 3V,working under 6-9V. Tattoo power supply: input AC:110V-220V conversion, output DC: 0-15V conversion, starting work under 3V.
What charger goes to Coleman cmz984 bug zapper?
The CMZ984 takes 6 volts DC at about 850 ma or 0.85 Amp. The problem is finding a plug that will attach to the Coleman charging port. Use the Radio Shack universal DC power supply. This is a little unit that comes with an assortment of plugs and has a number of switches on the Radio Shack DC power supply. (1)-Find a plug inside of the Universal DC power supply that fits without forcing, (2)-set the voltage to 6 volts and (3)-the polarity to "+". When the universal power supply is plugged into the bug zapper and the universal DC power supply set at 6 volts, turn on the BUG ZAPPER. If the lights inside turns on when the battery is dead then you probably have all switches set correctly. At yard sales, this UNIVERSAL power supply sells for about $1. It comes with a number of different plugs. Don't forget to write the voltage and polarity on the bottom of the bug zapper for the next time.
How do you log into a iPad?
press power button ON, supply the security code password if you set it ON.
What is the cost of an amp of power per hour?
The cost of running an amp of power per hour depends on the electricity rate set by the utility company. To calculate the cost, you would need to multiply the power consumption of the device in watts by the duration of usage in hours, then divide by 1000 to convert to kilowatt-hours, and finally multiply by the electricity rate in dollars per kilowatt-hour.
How do you run an amp?
well, you set up your power, remote, and ground wire. Then you need to run your RCA cables to the back of your head unit. After that, you just connect your speakers to the amp and your done.-Shocker
Why is my car amp clipping?
You have the gains set too high on the amp.
Shader voltage tattoo machine?
Many tattoo power supply output 0-15 voltages, as a general rule, shaders use less voltage than liners. There is no standard voltage for all tattoo machines, each artist has different desire for comfortable tattooing. The best way to find how much to be set is practice after knowing some basic rules. And becareful to start the machine at 3V, and adjust it under 6-9 V while working.
