answersLogoWhite

0

Indian Patent Stone (IPS) flooring is a basic flooring with good wearing properties. The specification for residential floors are generally 75 mm thick. Industrial floors should be kept to 150 mm thick.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the full form of IPS flooring?

Fullform of IPS Flooring is Indian pattern stone flooring.


What would be cost of ips flooring?

Rate of IPS flooring is Rs. 26.00 for 3" thick.


What is IPS flooring?

IPS - Indian Patent Stone flooring is called IPS flooring which ordinary screeding concrete with vacuum dewatered finishing for industrial floorings. This is used for doing epoxy flooring purposes.


What is the thickness of IPS?

India Patent Stone (IPS) flooring is generally laid to 25mm to 40mm thick.


What is IPS 2 inches in civil engineering?

Indian patent stone flooring of 2 inches i.e. basically cement concrete flooring Viraj saxena


What is the Difference between IPS and Plain Concrete Cement Flooring?

how is conventional brick bat coba work done


What does 925 IPS mean?

925 IPS is not a common abbreviation or standard term. It might refer to a specific technical specification or measurement in a particular context, so more information would be needed to provide a precise answer.


What is the Specification of mastic flooring in LPG shed?

IS 1195/1196 mastic with 25 mm thickness


Why glass used in ips flooring?

Indian Patent Stone: Glass is often traded out for the agregate stone in cement applications. It is strong and hard & readily available & it can add a unique look to the finished floor that cannot be achieved with Gravel.This is what another answers question says about the composition:Where on flooring subjected load is not more the flooring should be laid as per requirement of IPS. IPS is an Indian Polished Stone or Indian Pattern Stone. The base for IPS should be made very well compacted. The compaction of filled up base can be achieved by means of mechanical compaction. Over compacted base, lean base of either brick bat or sand should be laid. Over it a 75mm thick layer of plain cement concrete or plain lime concrete is to be laid. Now a layer of 100 mm thick reinforced cement concrete is to be laid. The concrete should be laid in two layer of 50 mm each. Each layer should be compacted, vibrated to achieve dense & monolithic concrete. The minimum cement concrete content for the concrete should not be less than 300 kg/m3. The final finishing of the IPS should be made with neat cement slurry, which is to be floated and finished perfectly to have a smooth finish.


What does authority IPS mean?

IPS autority?


How can You become IPS?

saeps to becoma an IPS


What is the proportion of Cement Mortar in IPS Flooring?

1:2 for1 is cement with hardener & 2 is 6mm stone chips Cement hardener is4:1 here 4 is cement & 1 is Hardener