yes the tile has to be fixtures and then put the tile
Bathroom fixtures are placed within a restroom or bathroom within a house. Most everyone in the world has a bathroom within their house hold that holds items such as a bath tub or shower, a toilet, a sink, toothbrushes, soap, and all the medications for kids and adults too.
The toilet flange should be placed on top of the finished floor for optimal performance and stability in a bathroom installation.
So that the light fixtures are protected.
For aesthetic and practical use, bathroom mirrors should be placed at waist level. The bathroom mirrors should offer a one meter clearance from the ground.
Chrome bathroom lights & fixtures are used for contemporary & traditional lighting in the bathroom. The give a decorative touch over mirrors above vanities. Wall chrome lights are placed to give plenty of lighting to brighten up the bath. Livens up this room of the house.
Any flat surface will do.
The process for determining the location of the bathroom rough-in during a home construction project involves consulting the building plans to identify the exact placement of the bathroom fixtures such as the toilet, sink, and shower. This information is used to mark the location on the floor before the plumbing lines are installed. The rough-in location is crucial as it determines where the pipes and drains will be placed to ensure proper functioning of the bathroom once it is completed.
The tank can be placed anywhere before the first fixtures, also make sure that it is easily accessible for repair.
Recessed lighting is key to shed light on the whole bathroom, however you may also want more lighting around the area of your mirrors, here incandescent bulbs placed behind glass fixtures would add the appropraite amount of light. (http://www.homeimprovementweb.com/information/bathroom-lighting.htm)
Shower grab bars should be placed vertically near the entrance of the shower and horizontally along the wall at a height between 33-36 inches above the shower floor for optimal safety and accessibility in a bathroom.
To wire a bathroom properly, follow these steps: Turn off the power to the bathroom at the circuit breaker. Plan the layout of the wiring, ensuring all outlets and fixtures are properly placed. Use the appropriate wiring and cables for the job, such as 12-gauge wire for outlets and 14-gauge wire for lighting. Install a ground fault circuit interrupter (GFCI) outlet near the sink to prevent electrical shocks. Connect the wiring to the outlets, switches, and fixtures following the manufacturer's instructions. Test the wiring to ensure everything is working properly before turning the power back on. It is recommended to consult a licensed electrician if you are unsure about any step in the process.
No, bamboo flooring can't be installed in the bathroom. It is easy to get moldy.