Go To The Masterlock Website And They Will Send You A New Key In The Mail. Take A Photo Of The Lock Unattached, Or Send The Entire Lock To Them. For Security Measures They Will Not Send Out A Reset Key If It Is Attached To Something.
You can also use a bent piece of heavy wire (like a piece of wire coat hanger) bent like the letter "P". A nail might also work. You must have the lock open and have the dials set to the existing combination. Insert the straight end into the reset key hole. Press in and hold while resetting the combination to the desired code. Remove the pin and you're done.
You need to contact the lock company. They will reset it or tell you how it can be done. You may need a new password.
You need the tool that came with the lock.
There are a few ways that you can reset your 5 letter WordLock if you have forgotten the combination. One way is to use the reset tool that comes with the lock. This tool is a small rod that is inserted into the lock in a specific way in order to reset the combination. Another way to reset the lock is to contact the manufacturer and request a new combination.
You have to read the code, repair the cause of the code, and reset the code with a scan tool.
you can buy a reset tool, or ask the mechanic to use his reset tool to change it. the tool cost $50.+
if you don't have a proper scan tool to reset it, then the only other way is to disconnect the battery for 5 minutes. warning : the radio and clock, etc will reset also & the radio security lock could activate (radio would then not work until reset)
Five days ago, I just got such Windows Password Reset tool, to reset windows password, and it can be burned onto a CD/DVD, or USB as recovery disk. I believe it is the best windows password recovery tool , and is your best choice
That is reset with a scan tool.
A Caliper Reset Tool is a tool used to 'reset' the brake caliper piston on calipers with an integral handbrake system. The tool spins the piston while applying pressure to compress it enough to replace the old pads with newer thicker ones.
It is a tool to reset the piston on rear discs brakes
Repair the cause of the code, reset with a scan tool or by unhooking the battery.Repair the cause of the code, reset with a scan tool or by unhooking the battery.
To reset the e39 oil inspection light, a special reset tool is needed. The tool is plugged in the data port under the hood, and it will allow the computer to reset the light.