Impossible to answer without a detailed description of the rifle being built.
25lb/ft
Page 278 2000 S430 Owner's Manual: Wheel mounting bolt tightening torque 110 ft.lb. (150 Nm).
Tightening torques are: Stage 1 - 15Nm Stage 2 - 30Nm Stage 3 - 90Degrees
There isn't a torque setting. You adjust the valves by tightening each rocker arm until there is no clatter and then tighten them 1/2 turn more.
Tightening bolt torque
According to the Autozone website : For a 1995 Ford Windstar , 3.8 L V6 engine : The spark plug tightening torque is ( 7 to 15 foot pounds )
In the "Chrysler Full-Size Models 1988-93 Automotive Repair Manual" says "Torque Specifications Ft-lbs Spark Plugs to set at "26"
Breakaway torque is the torque required to start the initial movement, in the loosening direction, of a bolt, screw, or nut from its (non−loaded) at rest position with the locking element engaged. Tightening torque is the torque necessary to move the bolt, screw, or nut along its threaded length in the tightening direction.
The wheel torque setting is 76
I need a picture of a leganza deawoo head bolt tightening patern
I would recommend that you consult a repair manual for torque values as well as tightening sequence
Recommended tightening torque is 35-40 ft. lbs.