5 volts
yes
Yes. the iPhone charger is compatible with iPod touch. they have same port.
If it is a USB charger it can plug into a computer. iPhone charger have many kinds of port. If it use USB port, you can connect it to PC. the cord can be used for charge or data transfer.
about 15 per hour its not a lot
To determine the watts needed to run a 12-volt drill charger, you can use the formula: Watts = Volts x Amps. If you know the amperage of the charger, you can multiply it by 12 volts to find the wattage required.
yes
Assuming 100% efficiency, a 36-volt battery charger would use 36 watts per hour to charge the battery fully. However, it's important to consider that chargers are not 100% efficient and may draw slightly more power from the wall.
An iPad charger typically uses 10 to 20 watts, depending on the model and the specific charger. Older iPads usually come with a 10W or 12W charger, while newer models, especially iPad Pro versions, can use chargers up to 20W or more. Appleβs latest USB-C iPad chargers are often rated at 18W or 20W, which allows for faster charging. You can find the exact wattage on the charger itself or in the iPadβs specifications.
To calculate the watts, you can use the formula Watts = Volts x Amps. If the voltage is typical at 120V for household outlets, then the trickle charger would consume around 720 watts (120V x 6A = 720W) while operating.
Your iphone should have a warranty on it including the charger. So go to an apple store and use the warranty to replace it.
Yes, use the wall charger.