How do you set the clock on a pioneer super tuner III car stereo?

Answer 1

Turn system on with only clock showing Press and hold "A" audio button till hour starts blinking the rest is easy too work out. More info such as how to make each diget go up or down in value as well as zero to the real Time Clock on my watch set by Fort Collins Radio Signals

Just a note: To set the clock on mine you need to hold the audio button along with the function button then the clocks starts flashing. Then just use the up and down button to change time. To go from hours to minutes keep holding on to the audio button and press the function button again this will flash the minutes.

Answer 2

Step #1--Turn off stereo (press and hold the source/power button until it turns off). Step #2--Press and hold Function button ("func" button, top right corner), until the clock appears flashing. Step #3--Use Up/Down keys (near audio button, the seek buttons for the Am/FM and Cd) to set the hours. Step#4--Press right to switch to minutes, use the same Up/Down buttons to change Minutes. Step#5--Press the source/power button to finalize. Step#6--Check by cycling the power on. Note: many other Pioneer CD Players appear to follow a similar scheme, except some of them use the audio button or the source button instead of the function button.

Answer 3

This is for the DEH-6800MP

Press function repeatedly until "clock" appears in the display.

Pressing < or > will select hours or minuets segments on the display

Hour - minute

As you select segments of the clock, they will blink.

Press up or down buttons to change hours or minutes as selected above.

Answer 4

Turn off the radio and hold the knob down for 5 seconds.

Answer 5

Is your stereo wired properly? Check your wires behind your dashboard, and check your wiring harness to make sure everything is attached correct and maby also check the fuse and stuff.