Travel Sentry is not a brand that makes locks- it is a luggage security system recognized by TSA. It is a sign that the lock is approved by this agency.
But, to answer the question, most 3-dial combo locks are set the same way....you need to open the lock with the current combination, turn the shackle either 90 or 180 degrees and push it down, then set your new combination while holding it down. Hopethishelps!
Travel Sentry is not a brand that makes locks- it is a luggage security system recognized by TSA. It is a sign that the lock is approved by this agency. But, to answer the question, most 3-dial combo locks are set the same way....you need to open the lock with the current combination, turn the shackle either 90 or 180 degrees and push it down, then set your new combination while holding it down. Hopethishelps!
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Pull the shackle up and rotate it 180 degrees. 2) Press and hold down the shackle 3) While holding the shackle down, dial in the new combo 4) Release the downward pressure on the shackle and rotate it to the lock position and you're done
Problems resetting and lock 3-dial combo lock
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Position the lock so if you're looking straight at it, the lock is set on it's large flat side, with the combo numbers on the right side and the n-shaped clasp open on the left. 2) Pull the clasp straight up and rotate it counter clockwise 180 degrees and press it down. 3) While holding the clasp down at the 180 degree location, dial in your new combo. 4) After the new combo is set, release the downward pressure on the clasp, continue rotating it counter clockwise to the lock position and you're done.
If you know the combination, dial it in, then close the lock, then press and hold the "reset" button. Whatever number you set before releasing the "reset" button will be the new combination.
From the samonsite website faq's Set / Reset 3-dial combination lock How do I set / reset my Samsonite or American Tourister 3-dial combination lock? Setting Your Samsonite or American Tourister 3-dial Combination Lock: 1. Remove the red packing arrow on the lock if your case has one. 2. The case is set to 0-0-0 at the factory. Choose your own 3 digits which you can easily recall (birthday, address, etc.). 3. Locate the button or lever adjacent to the dials: -If there is a button, push it towards the dial and hold while you rotate the dials to your desired setting, then release the button. - If there is a lever, move the lever to its lower position (some move to the right and up), rotate the dials to your desired setting, then return the lever to its original position. Your combination is now set to your 3-digit code.
the dial in poptropica is on the machine. once you have reset the dial go up until you see the enter sign on top of the fence.
the first code you dial in your mobile.
dial *228 No not just *288. That just reloads the phone and won't reset it With the phone powered on, dial ##4357* Then select view Scroll to the bottom of the and select[reset Then enter 000000 (six zeros) Then select OK It is recommended to re-program your phone after factory resetting it. (listed below) dial *228 and then press send and wait for phone to reset
First, spin the dial clockwise a few times to reset the lock. Then continue turning clockwise until you reach the first number of the combination. Then spin the dial counter-clockwise one full revolution so you are back at the first number. Then continue turning counter-clockwise until you reach the second number. Then turn the dial clockwise until you get to the third number (do not spin the extra revolution this time). At this point, you should be able to pull the lock open.
The dial you use to adjust the dash light brightness. Push and hold it in and the trip odometer will reset to 0.
To bypass any locks and manually reset the Sony Ericsson P1i - Jog Dial UP * Jog Dial DOWN Jog Dial DOWN * Jog Dial DOWN * Explanation: With the phone on, move the side/jog dial upwards once , then press *, move jog dial down twice and press * again, move jog dial downwards and press * You will then see "Service Menus" and can choose either "Service Information" "Service Tests" or "Format Internal Disk" Formatting the Internal Disk will reset the phone to factory default - erasing any data and programs in the process. Enjoy - and breathe deeply.