The magazine (clip) is held in the pistol by the magazine catch. This is a small stud that sticks out of the bottom rear of the grip. With the gun pointed in a safe direction and your finger OFF the trigger, hold pistol in right hand. Push the magazine catch to the rear (spring loaded) and hold it back, At same time pull down on the lip of the magazine at the front of the grip, and the magazine should slide free. THE PISTOL MAY STILL BE LOADED. After removing the magazine, pull the slide to the rear, and check the chamber for the presence of a cartridge.
Wiki User
∙ 10y agoremove clip. the pull back the slide to remove any shell that might be in the chamber. point weapon away from people while so doing.
Depends on who made it.
Not economically feasible.
gun show, want ad, gun shop, e-gunparts.com
Same as a Model 92 or if you have an extended magazine up to 20
Try e-gunparts.com, Brownell or Midway.
You can get the clip for an Iver Johnson pistol 22 on various online stores like eBay and Amazon.
Kel-Tec manufactures a Model PMR-30 Semi-Auto pistol chambered for a .22 Magnum cartridge (.22WMR) with a 30 round clip capacity.
A pellet clip is the same as a bullet clip except for pellets. It fits in the breech of a pistol or rifle and holds the pellets that are waiting to be fired. Some clips are in the handle of the pistol.
Try here- www.zastava-arms.co.yu
Your local auto parts store will have a inexpensive tool you can buy that will remove the clip with a little practice.
There is a "C" clip behind the handle that must be removed. Your local auto parts store can sell you an inexpensive tool to help you remove the clip without damage done.
remove clip. the pull back the slide to remove any shell that might be in the chamber. point weapon away from people while so doing.
Your local auto parts store will sell you a very inexpensive tool to remove the "C" clip behind the crank handle.
A revolver has a rotating chamber that houses the bullets a pistol has a "clip" or "magazine"
there is a C shaped clip behind the handle. I have the tool to remove it you can get them at auto zone. you can also use a small pick to pull clip out but watch out it will fling out
Need clip fpr cal. 6.35 M/M