Best left to a gunsmith
To remove the bolt from a Colt Sauer rifle, first ensure the rifle is unloaded and pointed in a safe direction. Open the bolt by pulling it to the rear, then locate the bolt release lever, typically located on the right side of the receiver. Depress the lever while simultaneously pulling the bolt fully to the rear to release it from the action. Once released, you can lift the bolt out of the receiver.
Colt did not make the rifle. Sauer made it for them.
Try e-gunparts.com
glock 17, berreta m9, colt 1911, sig sauer p226
Try want ads, gun shows, gun shops.
colt, bolt, molt, solt
On an 88 Colt along with most cars u have to remove the tire. Then there should be a cap with a clip that holds it on remove the clip then the cap will come off. There will be a bolt that u will have to remove. After all this take off the calipers. There should be two bolts that hold them together. Once the calipers are off remove the plate. (If applicable) There might be one more bolt that holds the disc to the axle. Then the discs should slide right off.
birds
Bolt, molt, colt, and dolt.
blots, jolts
The serial number and possibly on the bolt.
Remove the firing pin from the rear and the locking bolt will side out the side of the bolt