Since all the markings on a thermometer are not numbered, it is easier to read if the markings are the same (the markings are usually by ones).
bolt face signature
The questions on the SAT which have negative markings on them are called MCQ questions. It can be as low as -25% for wrong answers.
a temperature line is a line of temperature
A line is normal to another line when it is perpendicular.
No, you can remove the markings with baby oil.
The answer depends on the graduation (markings) on the ruler.
No, a pencil is not reversible because once you use the eraser to remove the markings, you cannot bring back the original markings that were erased.
From markings and proof marks on the gun barrels and the frame. In some cases you need to remove the barrels, and look on the underside from markings.
a line/dash on the matching sides
A line is a continuous, single, long mark on a paper or other substance / material that can show written or typed markings.
The easy way is to make sure you don't move anything when you take the chain off. Otherwise, there are usually markings on the engine that you can line the markings on the pulleys up with.
Try Goof Off, it may work better.
You must remove it, fit a new one and then bleed the brakes to remove the air in the new line.
How hard is it to remove and is there a digram procedure available on-line to remove it.
it isn't a specific line, it is the road. it doesn't do anything except to provide space in between the two solid yellow lines.Added: In some cases there IS an identifiable black line between the two solid lines - what that is, is where the highway department has painted out the old previous line markings and replaced/repainted the road with the new visible ones (e.g.: perhaps changed the markings from a 'passing' zone to a 'no-passing' zone).
To set the time simply remove the black plug with a straight screwdriver located on top of the left side case, then remove the cam cover located on the left side of the jug. The cam gear has a line and the case has an upside down triangle. Line them up and take a flashlight to look into the hole where the black plug was. There is the markings f and t the t is time. Line that up with the notch in the threads of the hole. You will need to loosen the chain tensioner to rotate the gears, and that is located in the back of the left side case.