To remove the handguard on the M16 assault rifle, first remove the magazine. Next pull back the charging handle and inspect the chamber to ensure that the weapon is clear. Now place the rifle on the ground with the buttplate on the floor and the muzzle facing up. Pull down on the delta ring with one hand, and pull apart the handguard with the other. If you have an M16A1, the handguard will come apart down the middle. If your M16 has A2 or later style handguards, they will come apart to the left and right. M16A1s lack a flared delta ring, and may require a tool to pull down if you lack sufficient strength.
Hand grenade harnesses.
When contact with the enemy is imminent, you should have- Rifle sights just below eye level Firing hand around the pistol grip. Non-firing hand on the hand guard. Trigger finger straight along the receiver. Buttstock of the rifle in shoulder. Muzzle pointed in the direction of enemy contact.
It is a yearly qualification that is added to you're record for promotional points.
either put your hand through side panal and remove plug and bulb or remove part of plastic inner guard and put hand up to bulb holder and twist and remove and replace bulb latgter best way
it is in the front right hand side under the splash guard. you need to remove the front right wheel and the front part of the splash guard and you will get at it from there. but don't mix up the pipes going to it.
A M16 cost about $2000.00
Remove drivers side front wheel. Remove inner plastic wheel arch/guard. The crankshaft pulley is now visible To the right hand-side of the pulley is the crankshaft sensor
how to remove and replace trigger guard on Harrington Richardson topper shotgun n
M16
The M16 was invented @ 1960
The M16 and the M4 are the US designations for the AR-15 pattern of rifles.
remove the wheel and splash guard then you can see the horrible thing twist the bulb holder about 30 degrees and there he is the bulb i wouldsuggest a led bulb replacementlonger life and all