The sensor is removed from the garment by the sales clerk at checkout. These are security sensors which activate the alarm system if taken between the entry/exit receptors in a store. The are removed by a magnet in normal situations however, you would need the correct pole, strength etc. If you are caught attempting to remove these some law enforcement organisations will prosecute on the ground of attempted theft.
Unplug the electrical connection at the sensor. Remove the small bolt and retainer holding the sensor in place. Remove the sensor.
camshaft sensor is under power steering pump. remove steering pump, then set aside do not remove hoses. sensor is down, remove one bolt that holds sensor in, then pull up on sensor to remove.
how do i remove ink stains from wet clothes
Disconnect the electrical connector, remove the mounting screw and remove the sensor.
how to remove crankshaft position sensor from 91 Buick Regal
Remove the vacuum hose from the sensor. Remove the sensor retaining screws. The sensor will come off. Reverse the process to install the new sensor.
Find the ABS wheel sensor. Loosen the bolts that attach it to the suspension. Remove the bolts that hold the sensor to the wiring. Remove all other bolts. Remove the ABS sensor.
Remove the vacuum hose from the O2 sensor. Remove the wiring harness. Remove the O2 sensor retaining screws. Reverse the process to install the new O2 sensor.
Remove the oxygen sensor vacuum to. Remove the oxygen sensor screws. Reverse the process to install the new oxygen sensor.
Remove the wiring harness from your speed sensor. Remove the speed sensor retaining bolts. Reverse the process to install your new speed sensor.
Remove the vacuum hose from the oxygen sensor. Remove the oxygen sensor retaining screws. Reverse the process to install the new oxygen sensor.
To remove your clothes on CP, just click on them on your profile and they should go away