0
Add your answer:
Earn +20 pts
How does clip lock into a Chinese sks?
The clip does not lock into the rifle. To load the SKS, you would first lock the bolt to the rear (this requires the magazine to be inserted). You would then take the clip - which holds ten rounds of ammunition - and insert it into the slot at the front of the bolt carrier. You would then push down on the rounds to feed them from the clip into the magazine. After the magazine is loaded, you then pull upwards to remove the clip, at which point, you can chamber a round and begin firing. See related link "SKS carbine operations" for a visual demonstration of this process. If you're looking for how to install the magazine into the SKS, check the related link "SKS Assembly and Disassembly". See also the related link "Clips vs. Mags"
I have a Chinese Type 56 SKS with a fixed 10 round clip. Can it be removed and a detached clip be used?
Yes. You need to remove the trigger assembly and possibly even the stock (not necassarily though) and you can just pull it out. Reassemble and it will be ready for a mag
What is the value of a Chinese sks assault rifle without a clip?
The SKS isn't an assault rifle, either by the BATFE's definition, or by the actual definition. Value is going to be dependent on exact model - the Chinese made several variations of the SKS. Depnding om condition, with the missing magazine (not clip), and assuming you have the basic Type 56 carbine in good working order, you could expect between $120 - $200 for it.
Can a yugo sks clip go incide a norinco type m sks?
Are you talking about the clip to load rounds into the magazine, or the magazine itself? It is a magazine, not a clip.. In regards to the clip, the answer will be yes. In regards to the magazine, the answer is no - the SKS-M uses a detachable AK magazine.
How do you install a 30 round clip in Chinese SKS?
It's a magazine, not a clip. To install one, you have to field strip the rifle to the point where you remove the trigger assembly - once this is completed, you can remove any existing fixed magazine and replace it with another fixed magazine of your choosing. Instructions can be found at the related links at the bottom.
Do you have any pictures of clips for the Chinese SKS?
Typing "SKS stripper clip" into any search engine (such as Google) should yield those results. If you're referring to the magazine (which is often mistakenly referred to as a clip), then you could get the same results by typing "SKS magazine" into any search image, then clicking on the tab which says "images" once your search results come up.
Is Russian sks the same as Chinese sks?
Very similar, minor differences,
How old is a Chinese sks?
They began production of the Type 56 carbine (the Chinese designation for the SKS) in 1956, and production (for the civil market) continues to the present day.
Do you have to register an sks in California?
The only SKS carbines currently which require registration are the Chinese-made SKS-M and SKS-D models. Those could not be imported into the state after 1989, and had to be registered by 2000.
Is Chinese sks as good as a Russian sks?
This is purely opinion on my part, but the SKS was created in Russia, and made there for a number of years before the Chinese began manufacture. The Russian SKS tends to have better quality machining than the Chinese. Both are good, but the Russian is the original, and the better built rifle. Examine one of each side-by-side, and see what you think.
Who is the manufacturer of a Chinese SKS?
Various Chinese state-owned factories, and they were marketed by Norinco.
How can you find US importers of Chinese SKS rifles?
you can find sks rifle at virtually any gun shop but searching for a Chinese version may be a little more difficult.
