0
put the set of ribed jaws pointy end first down the barrel so that they protrude from the front end evenly. put the peice of steel that is mushroomed at one end that the spring fits over down the barrel mushroomd end first followed by the spring. align this into the top hole of the handle with the big open spring. push through short round lug with cut out aligning cut out with spring so that spring locates into cut out. this should now stay atached to handle. locate assembly into other handles outer sheath. put retaining pin and collat through to attach handles together. job done.
Add your answer:
Earn +20 pts
How do you use a pop rivet gun?
to use a pop rivet gun you have to get two pieces of metel and drill 2 holes into the metal
How does pop rivet gun work?
jimmy
Can you use wd40 on a pop rivet gun?
Yes you can.
When a pop rivet is set which part of it is discarded?
The stem of the rivet is discarded. It is pulled in to the rivet gun and breaks off at a cetain point.
What does a rivet gun do?
It installs rivets. Usually these are pop rivets. The standard rivet tools are air hammers.
Do you need a rivet gun to secure pop rivets?
Yes. It would be very difficult to pull the shank through the flange without a rivet gun.
Advantages of a pop rivet gun?
Makes a quick, permanent fastening when you can only reach one side of the material.
What is a pop rivet gun used for?
pop rivits are blind rivits to attach parts. Most of the time is metal to metal. Rivits can be bought at hardware store.
What is pop riveting?
Pop riveting is a technique used to join together two pieces of metal or plastic with rivets. A hole is drilled through both pieces of metal, and the rivet is passed through both holes. Rivet pliers are placed onto the pin, and the handles are pulled together, pulling the pin head into the rivet. The pin breaks off, leaving the rivet attached firmly in place.
What is name of you?
Pop Rivet.
What is the difference between a pop rivet and a rivet?
The main one being that pop rivets can be attached with a blind spot.
Is the anvil on a pop rivet standard?
Yes, the anvil on a pop rivet is a standard component. It is used to support the rivet while it is being compressed and form a secure joint.
