Take it to a gunsmith.
ANS:Most modern weapons come from the factory with the receiver already tapped for bases. All you need to do is locate the appropriate bases (Leupold, Weaver, Redfield, etc.) that will fit the weapon, unscrew the plugs and screw on the bases following the manufacturer's instructions.Always use a proper screwdriver. If you notice, the screwdriver that you just used to tighten up your door hinges may be for a slotted screw but the blade is tapered. That will foul up the slots on screws in your weapon. A proper slotted screwdriver blade for working on a weapon will be square and fit the slot without any play and will be the width of the slot. Spend some money for the proper tool.
Before installing bases, I like to use a drop of Loctite(R) on the screw threads so they don't loosen.
Drill and tap for screws to hold rail in place.
you can put a scope on almost any gun, but why?
Yes. without rails there is nothing to mount the scope (and scope rings) to.
If they both have the same rails, yes. Rails are usually Picatinny or 3/8 inch.
You can get a base (or bases) that will attach directly to the top of the receiver. Then the rings mount to the base. Pretty standard scope mounting process.
Since it has weaver rails, all you need are Weaver scope rings. An offset mount will help too.
in the scope its a slide on the top put the scope on the gun aligned with the hole in the gun and scope then pour bbs into the scope
Only if the airgun has a scope rail designed into the gun. You will also need an airgun scope not a firearms scope.
In general scopes are not very useful in Paintball due to the relative inaccuracy of the Paintball itself and the tunnel vision effect of the scope. but if your Paintball gun had weaver or 3/8 rails, you can mount whatever scope (or sight, a better option) you wanted on it
It all depends on the model of the BB gun. There are over 300 different modal BB guns. Which one do you want to scope.
if you put the scope on right to where the arrow on the scope is even with the arrow on the gun then at the top of the scope there is a nob thing if you push that forward you see the inside of the scope then you put the bbs in but don't worry you can still see through the scope
It already has rails where the carry handle is attached, but you could also buy a handguard with rails.