It depends on the type of floor that you are putting down the vinyl flooring on top of. If it is concrete, then make sure it is clean, dry and repair any cracks or holes. If the old vinyl flooring is in good repair then just put the new vinyl flooring over it or use an embossing leveler for slightly worn vinyl flooring. If the old vinyl flooring is in very poor shape remove it completely. Plywood underlayment can be used for other types of flooring that you will put new vinyl flooring down on top of.
Depending on the size of the floor that you are replacing, installing a vinyl floor can be a weekend project. There are a number of steps to take before actually installing the floor, such as removing the original flooring, and prepping the floor for the new installation.
We have had a new kitchen floor, it is a grey vinyl that is embossed to look like granite tiles.
If the original vinyl floor is still down solid you are supposed to be able to lay another vinyl floor on top. This requires some specific prep work but it can be done. It is a better idea to just remove the vinyl and start with a clean solid surface to apply the new floor. The more layers, the more potential for problems with the layers lifting
vinyl is impervious to liquid and does not need any sealing.
It is possible, but it's not the best practice. If you can easily remove the existing vinyl, then do so. If the vinyl won't peel up, then you should consider two possibilities: Remove the vinyl along with the wood underlayment (or scrape it off if your subfloor is concrete), or install new wood underlayment on top of the existing vinyl.A third possibility is this: If the existing vinyl is securely glued to the floor, you could apply an embossing leveler (cement-based product) in a very thin skim coat over the vinyl. This seals in any stains, levels the floor, and gives the new vinyl a nice, smooth surface to lay over (or a good surface for vinyl glue to adhere to).Most flooring manufacturers will not honor the warranty on their vinyl if it is installed over existing vinyl, unless you do the embossing leveler step above.
they are new vinyl strips with wood textured surface and adhesive backing for easy installation. please advice if it is applicable to the mosaic floors and will not bubble up due to moist underneath when the room temperature is low.
A waning moon is a moon going from a full moon to a new moon.A waxing moon is going from a new moon to a full moon.In other words, waning is going away and waxing is coming.
I've used NON-AMMONIATED FLOOR STRIPPER, if the floor has no scratches, it's left like brand new. In Canada you find it at Home Hardware.
# You are installing it onto the correct subfloor. 1/4" BC pine plywood is the best if you are not on concrete. # The subfloor is clean and dry. # Any imperfections on the floor are sanded and leveled. If you fail to do this, those imperfections will telegraph into the new vinyl. # After completion, the floor MUST be rolled with a 100 lb roller.
Stripping and waxing a floor involves removing the old wax coating, deep cleaning the floor surface, applying a new layer of wax, and then buffing to a shine. It helps to restore the floor's appearance, protect it from damage, and make it easier to maintain cleanliness. It is a common practice in commercial settings to keep floors looking their best.
if the old floor is down good and tight, you can go right over it. If it has a strong embossed pattern it may telegraph through the new floor though. you can skim coat over that if you need to.