Enter the combination
To open a Master Lock combination lock, first, turn the dial several times to the right to clear it. Then, turn the dial to the right and stop at the first number of your combination. Next, turn the dial to the left past the first number and stop at the second number. Finally, turn the dial to the right again to the third number, and pull up the shackle to unlock it.
Slide the card through the slot where the lock is by the door. Set the card where the lock would be. Now open the door.
It depends on the type of lock. Could be thousands.
You have to have a combination. If you have a key lock you don't need a combination, all it is is a lock that says master and a key to turn it and then it opens what you have in it.
A Monkey, or A Turkey.
A key, or a Combonation
To open the lock you enter the combonation that comes with the lock and pull up on the shackel. to close it, put the shackel in the hole on the lock and push down.
Simply open the lock and change the open lock to your new code, E.g 1234, Then close the lock then 1234 will be the combonation That is how i change my locks anyway
To open a Master Lock combination lock, first, turn the dial several times to the right to clear it. Then, turn the dial to the right and stop at the first number of your combination. Next, turn the dial to the left past the first number and stop at the second number. Finally, turn the dial to the right again to the third number, and pull up the shackle to unlock it.
9 , 37 , 15
There really is no way. If you put the lock on something open important, you may have to cut the lock.
Pick Lock
You can open a key lock on a door knob, or you can open a deadbolt lock on the door itself.
buy a new lock
Im not a locksmith or trying to be a smartbut but you can put gasoline in and around the lock lite it and then wait for it to go out . Then get a hammer and nock the lock off. Their should be to parts one that falls on the out side and one that falls off on the inside. Ive done this before.
If you do not have the combination, there is no way to open the lock. A master combination would defeat the purpose of having the lock.
The lock has a clip on the inside, pull the clip off and the lock will come out, remove the lock rod and then you can use a screwdriver to open the lock.