You might try painting it first.
Usually. Most peel-and-stick vinyl tiles have a decent glue and will adhere to a clean and relatively smooth subfloor. Make sure it is not OSB or particle board subfloor as peel and stick will not adhere I would recommend priming the subfloor with an oil-based primer first. If it is plywood, make sure it hasn't delaminated. Vacuum the subfloor thoroughly first. Paint and glue don't like dust.
You need 1 1/4" of subfloor. Typically it is 3/4" of plywood or OSB and 1/2" of mudbase or cement board.
OSB stands for oriented strand board. It is made of wood strands and waterproof adhesives. The strength of OSB board is equal to that of plywood.
If someone wanted to purchase an OSB there are a variety of places where someone can do so. Some of these places are Calibex, Fordaq and cheap osb and nsbe.
OSB
Yes, or it will take a lot of paint due to the fact that the osb will soak it up.
They are both engineered wood products, constructed using similar methods. The main difference is price. OSB (oriented-strand board) is generally cheaper and has a more uniform composition and appearance. Even though they are both made of layers of smaller pieces of wood glued together, the small pieces that make up a sheet of plywood are still quite visible in the finished product, unllike OSB. OSB is also more commonly used nowadays in residential construction than plywood for cost reasons.
I NEED THE WEIGHT OF 7/16 OSB PLYWOOD One sheet will weight 47 lbs.price
17.5kg
52
OSB (oriented strand board) comes standard in 4' x 8' sheets, but you can order it in 10' and 12' lengths. You'll have to contact a supplier that caters to the commercial construction contractors. You're not going to find it in chain stores like Homie or Lowe's The above is accurate but OSB is available from some manufacturers in some markets in other lengths up to 145 1/8"
OSB - Order of Saint Benedict