hey man.. I was able to buy this beer in Stoke on trent. By the case load too.. It was very cheap.. It was in a shop called b&m. They have stopped selling it now.. I love that beer..
IF the bolt is properly installed, are you trying to close the bolt on a cartridge? The Mauser is designed to feed from the magazine- if you single load a cartridge, the extractor may not fit over the rim.
Do not attempt to do load with smokeless powder.
A clip is a loading device, typically consisting of a metallic strip which will hold a number of cartridges (usually, five or ten). The clip is used to quickly load the magazine, allowing the firer to load five or ten rounds at a time, rather than just one at a time.
Maybe you are trying to load the wrong cal. bullet! The Mauser is desigend to only feed from the internal magazine. The extractor claw catches the rim of the cartridge as it rides upward from the magazine. If a bullet is in the chamber, the claw of the extractor will not go over the rim of the cartridge thus not letting the bolt not to close. Trying to force the bolt close in this situation will cause damage to the extractor.
Open the bolt, ensure the chamber is clear, then insert rounds into the magazine through the bolt opening (this may be done loading each round by hand or by inserting a stripper clip into the guides, then pushing down to push the rounds off the stripper clip into the magazine).
Bear the load. Bare the load would be to uncover the load...
Live load is a load on the object other than the load from itself.
THE PRODUCT OF LOAD AND LOAD ARM IS CALLED MOMENT OF LOAD.
"Will load" is the future tense of load.
A continuous load is a constant load. A noncontinuous load is one that varies over time.
Load distance is the distance you have to bring your load up an inclined plane.