KD stands for damascus barrel I do not know what the Y stands for. You should not fire the gun with a damascus barrel because it is weaker and might explode with modern shells
We cant find one for you here. Browning Arms Co never made a shotgun with damascus barrels as far as we know. Its possible that a gun was made with those barrels built on one of Brownings patents.
Quite often the shotgun will tell you how the barrels are made. If it says "twist" or "laminated" or "damascus", then it is one of the types generally called damascus. If it says "armory", "forged", or "fluid" then it is a more modern construction. Damascus barrels will show a pattern, although it can be covered with bluing or the pattern can be simulated. You can check by removing the forearm and polishing a small spot on the bottom of the barrel. This will remove either the bluing that hides the pattern or the simulated damascus pattern. As far as safety, the best damascus constructed barrels are stronger than a low-quality fluid steel barrel, and probably equal to most when new. But time will weaken the welds, so it is wise to retire an old damascus gun unless you know it has had proper care for its entire lifetime. Since your gun is marked for smokeless powder, it is PROBABLY fluid steel and PROBABLY has 2 3/4" chambers, but if you intend to shoot it, have it checked by a competent gunsmith and follow his recommendations. Damascus barrels were made to be used with black powder and so are thicker at the breach (to handle the fast explosion of powder) and thinner at the muzzle, as black powder. Due to the fact that modern smokeless powder buns at a slower pace, thus building up more pressure towards the muzzle which could cause the metal to split or rupture, it is not recommended that modern ammo be used in a Damascus barrel.
i have a 20ga. double barrel side by side 27 3/4 in. barrel has damas extra fin on barrel. the only other stamping is CAL STALB V1 WOULD LIKE TO KNOW ANYTHING ABOUT IT. THANKS VERY MUCH DON
Don't take this as gospel on this subject, but this is my understanding. Damascus is a name of steel, made originally in (unexpectedly) a city named Damascus. Damascus steel was supposedly created by a combination of folding two different types of steel together, and folding the two steels over and over again, creating many layers that combined the properties of the two used steels. This steel was supposedly the strongest steel ever known; it was legendary. The secret was the supposed combination of the iron and carbon which created small tubes of reinforced carbon bonded with the ferrous iron, creating exceptionally tough steel in which the long tubes would be able to bend without breaking, creating exceptionally strong (and therefore very sharp and hard) steel but without sacrificing the flexibility of the weapon so it was not brittle. The technique of creating Damascus steel has been lost for centuries; I know that sound like a load of crap, but we seriously have no idea what happened to the creation technique. People may claim that we now have found a way to "recreate" damascus steel, but it's merely an imitation. We are guessing how and why the steel was both so strong and flexible, and that's kinda where we're at. A damascus gun is a gun which has parts made of damascus, most frequently the barrel. It is also an uncommon slang term; a "damascus" gun is sometimes used as a way to describe a gun which is match-grade or just functions extraordinarily well. It could also be used to describe a piece which has been heavily modified to improve on its quality.
I have a Spencer hammerles shotgun, and it has America 's new hammerless on the barrel
It will be marked on the barrel
Need to know which maker & model #
In order to answer your question correctly,I would need the maker of the shotgun,shotgun model,and type of shotgun we are talking about(pump action,single shot,semi-auto etc.) I would also need to know what type of barrel you have(plain barrel,solid matte rib,or vent rib barrel).also include the overall condition of your shotgun and amount of blueing remaining on the receiver and barrel.
All I can tell you, It was before 1925. You should get a copy of The Ithaca Gun Company - From the Beginning" by Walter Snyder. There is a list of Ithaca serial numbers in this book that have been verified as belonging to Wells Fargo and Company. If your number is in the list, it will greatly increase the value of your gun.
50-100
Liege is the city in Belgium where it was made. Would need to know ALL the markings on the shotgun.