Is a headset plugged in? If so, unplug it.
A Sansung Bluetooth headset can be used, but will likely give instructions for a Samsung phone. To use the headset, # Follow the instructions for the headset to set it into pairing mode. # Then, on the RAZR go to Menu, Settings, Connections, Bluetooth, Handsfree, Look for Devices. The phone will then list all Bluetooth devices that it finds. # From the list select your headset. # Then enter the passkey given with the phone. After all this, test the headset by making a call.
To pair your Plantronics Voyager headset with a Panasonic cordless phone, first ensure the headset is in pairing mode by pressing and holding the power button until you see the indicator light flash red and blue. On the Panasonic phone, access the Bluetooth menu and select "Add Device" or "Pair New Device." Once the phone detects the headset, select it from the list and confirm the pairing. Follow any additional prompts, and your headset should be successfully connected to the phone.
In order to connect a headset to a BT Syndegy phone, simply stick the headset connector into the port for the headset on the phone. This port is usually located on the right side of the phone.
I have the same phone and just found the resolution. Remove your case and look at the bottom of your phone (the area where you plug in your charger). To the right of it is the first hole where a headset is plugged in. Right above that hole and a little to the right, you will see a small pin. Push it in and the headset icon should disappear from your display. Your phone should operate normally. Email me at pha_see_shus_1@yahoo.com if you have any further questions. :)
There should be a small button on the wireless headset that when pressed causes the headset to send a signal to the phone to answer the incoming call and connect it through the wireless headset. See the image above for an example.
The telephone earpiece on a phone is called a headset.
Speak to your mobile phone retailer as you will need to get a Bluetooth headset that is compatible to your current cell phone.
If you have a cell phone and like to talk while you're on the go, then a cell phone headset is a very real necessity for your phone. Especially when you consider how many states have begun to crack down on cell phone use while driving, you really need a cell phone headset if you plan on legally talking on your phone while you're driving. A cell phone headset can be very cheap or astronomically expensive, depending on which model you need. If you plan on using the headset for work, consider using a bluetooth headset that won't have a wire dangling in your way.
To turn off the headset on an Assurance Wireless phone, simply unplug the headset from the audio jack. If the phone does not recognize that the headset has been removed, you can restart the phone by holding down the power button until the power menu appears, then selecting "Restart." After the phone reboots, the headset function should be disabled.
Turn off your phone charge it all night. Do the same to your Bluetooth headphone. Now after you are sure that both the devices are fully charged, go ahead and turn on your Phone. Make sure the headset is still off (folded in and bluelight not blinking). In your Phone set go to the Bluetooth connection (in my Motorola L6 it was in Menu>Settings>connection>bluetooth>handsfree) Now press the talk button on the Headset for about 5 seconds. The ring will turn purple. This is the "Find Me" mode of the headset. Now in your phone, click "look for devices." Your phone will find the Headset. Do a "Select" and it will probably ask for a password. put in "0000" it should then successfully connect and also save the connection.
no
No - the bluetooth headset simply provides a method of making and receiving calls without holding the phone to your ear.