No published data I am aware of
See discussion page for correct answer. Bad answer removed by Supervisor.
. to remove the bolt on this model you must lower the tube assembly,there is a screw under the stock, remove stock first.
First you have to tell us what condition the rifle is in. Is it Excellent, Good, Fair, or Poor. Without this information it is impossible to give you an estimate of the value. its in good shape DAISY model 2202/2212. 10 round mag, 6.5 lbs. 2212 has synthetic stock, 2202 has walnut stock. Fair $50 Good $60 VG $75
I HAVE A MODEL 20 12GA BUT NO BOLT, VERY GOOD SHAPE, SELL ME YOUR BOLT OR YOU CAN BUY MY STOCK AND BARREL VERY GOOD SHAPE.
Remove the stock and you will see what is keeping the bolt from sliding out.
50-250 usd
Yes it is
I am trying to find out where to get a stock and a bolt for a 3 in. model 15a 410 shotgun the brand is a ward western field can you help.
Yes, the Deluxe Model
Remove the barreled receiver from the stock and then remove the screw from the left side of the receiver. The bolt will slide out.
Remove the buttplate, shone a light in the hole in the center of the stock. You should see the head of a bolt. Using a socket and an extension, unscrew the stock bolt. Stock should slide off.