0
Removing the slide:
- Remove the magazine and put the striker in the fired position.
- While holding the latch up, push the slide back about .5 to .75 of an inch until it engages the striker guide on the inside.
- Keeping the latch engaged to the striker guide inside, let the slide come forward about .25 of an inch.
- This disengages the striker guide from its latch on the frame.
- Lift the rear of the slide up and you can remove it in a forward direction.
- Be careful not to loose the striker guide as it may pop off its spring.
*Be aware that RG firearms, especially this pistol are notoriously bad quality. The slide has a tendency to crack, break, and fly off when firing.
What else can I help you with?
How do you disassemble an RG 42 caliber .25 pistol?
Best left to a gunsmith
How do you disassemble a RG Model 42 25 caliber pistol?
Ask a gunsmith for help
What is the age of a .25 caliber RG Model 25 pistol?
No published sn data.
What is Price of rg 25 automatic pistol?
15-45 USD
Mod RG 31 38 Special Pistol?
25-50 USD
What is a 38 cal rg pistol worth?
25-60 USD or so
What is the value of a pistol by rg model 23 cal 22lr?
25 USD
How much is a rg 25 cal pistol worth?
No more than 50 USD
How much is a RG 14 S pistol worth?
25-50 USD or so
What is the price of a rg 25 automatic pistol?
Seldom exceed 60-70 USD
How do you disassemble a model rg 26 25 cal handgun?
In order to disassemble a model RG 26 25 handgun, you must first remove the gunâ??s magazine, making sure that the chamber is empty. Pull back on the gunâ??s slide and then push up on the blued knurled thumb lever, which is found at the back of the slide. Raise up the gunâ??s slide, moving it forward and off the gun barrel. Then, you reassemble the gun in a reverse manner.
How do you disassemble rg 42 .25 pistol?
To disassemble an RG 42 .25 pistol, first ensure the firearm is unloaded and pointed in a safe direction. Remove the magazine and pull the slide back to check for any chambered round. Then, locate the slide release lever, which is typically found on the side of the frame; press it in while pulling the trigger slightly to allow the slide to move forward and off the frame. Finally, once the slide is removed, you can take out the recoil spring and barrel for further disassembly. Always refer to the manufacturer's manual for specific instructions and safety precautions.
