How do you disassemble a Voltran Ekol Aras Magnum 9mm?

Answer 1

Ekol Aras Magnum is a blank firing replica of a Browning Hi-Power pistol. The disassembly should be the same.

1. Make sure the pistol is unloaded by removing the magazine and locking back the slide by pushing the safety upward into the disassembly slot (the one towards the front of the slide) while the slide is retracted.

2. Remove the slide stop by pushing the slide top pin from the right side of the gun. You might have to wiggle the stop a little bit to make it come out.

3. Hold the slide and release the safety. Move the slide forward and off the frame.

4. Remove the spring and guide. Be careful to not let the spring fly.

5. Lift the barrel out of the slide

Further disassembly is not recommended.